DSC HD-HD 4K PLUS A

DSC HD-HD 4K PLUS A xi

1. Provide a video scaler that shall support up to 4K @ 60 Hz over one or two inputs and one or two outputs, for processing and converting between HDMI video resolutions and frame rates.
   1. Rack-mountable scaler for HDMI video sources and associated digital and analog audio
      1. Video Input Requirements
         1. Provide video input connections
            1. Two HDMI
         2. Accept HDMI video from 480i up to 4096x2160 @ 60 Hz with 4:4:4 color
         3. Shall accept video up to 4096x2160 @ 60 Hz over one HDMI connection
         4. Shall accept video at 3840x2160 or 4096x2160 @ 60 Hz as columns over two HDMI connections
         5. Shall support HDMI 2.0 specification features
            1. Data rates up to 18 Gbps
            2. Deep Color up to 12 bits per color
            3. Embedded HD lossless audio formats
         6. Provide automatic detection of input video parameters
            1. Determine total pixels, active pixels, active lines, H/V starting points, H/V image positions, H/V image sizes, and video clock phase
         7. Provide image adjustments for brightness, contrast, detail, H/V sizing, positioning, and overscan
         8. Provide storage and recall of video parameters and picture settings
            1. Automatic memories for each video input
               1. Save video settings and picture adjustments without user intervention
               2. Automatically recall settings when the same video rate is encountered
               3. The user may selectively enable or disable automatic memories
            2. Manual user presets
               1. Save picture adjustments
               2. User presets may be saved and recalled using front panel controls
               3. User presets may be saved and recalled electronically via RS-232, Ethernet, or USB connection
            3. Manual input presets
               1. Save video settings and picture adjustments
               2. Input presets may be saved and recalled electronically via RS-232, Ethernet, or USB connection
         9. Provide automatic 3:2 and 2:2 pulldown detection
         10. Provide signal reclocking for incoming HDMI signals
      2. Video Output Requirements
         1. Provide video output connections
            1. Two HDMI
         2. Provide a range of selectable video output rates from 640x480 to 4096x2160 @ 60 Hz
         3. Shall output video up to 4096x2160 @ 60 Hz over one HDMI connection
         4. Shall deliver identical video on both HDMI outputs
         5. Shall output video at 4096x2160 or 4096x2160 @ 60 Hz as columns over two HDMI connections
         6. Support custom user-defined output resolutions via EDID management
         7. Provide image scaling and video format conversion with 30-bit precision processing and 4:4:4 color bandwidth
         8. Provide motion-adaptive deinterlacing for signals up to 1080i
         9. Provide aspect ratio control
            1. When in FILL mode, the video image on the output screen shall always fill the output screen without letterbox or pillarbox
            2. When in FOLLOW mode, the video image on the output screen shall always preserve the original aspect ratio of the input signals
         10. Support locking of the output frame rate to the frame rate of the input
         11. Provide internal test patterns for calibration and setup
         12. Support image freeze via RS-232, Ethernet, or USB connection
         13. Support upload and placement of a custom logo graphic at any position on the video output
             1. Support logo placement as a foreground image
             2. Shall support uploading logo graphics in BMP, JPG, PNG, GIF, or TIFF format
             3. Shall support displaying full screen images up to 4096x2160 resolution
             4. Shall support up to 16 logo presets
             5. Shall support keying with selectable effects including transparency, color key, level key, and alpha key
         14. Support automatic muting of video and sync output when no video input signal is present
             1. Provide a choice to generate a blue screen or a black screen, or display a user-provided image file, before disabling sync
             2. Provide a configurable timeout period before disabling sync
             3. The user may selectively enable or disable automatic muting of sync output
         15. Provide a low power standby state selectable via RS-232, Ethernet, or USB
         16. Support the connection of DVI displays that do not recognize HDMI-specific formats
             1. Automatically enable or disable embedded TMDS audio and InfoFrames
             2. Automatically set the correct color space
         17. Support selection of output color space as RGB or component video
      3. EDID Requirements
         1. Provide automatic EDID management between connected devices
            1. Provide a set of pre-stored EDID files
            2. Support capture of EDID from any connected display
            3. Support user uploading of custom-generated EDID files
            4. Support assignment of any pre-stored, captured, or custom uploaded EDID file to an HDMI input connection
      4. HDCP Requirements
         1. The unit shall be HDCP 2.3-compliant
            1. Provide the option to disable HDCP processing at the HDMI input connections when passing unencrypted content
            2. Provide selectable, human-readable visual confirmation of HDCP compliance when encrypted content is sent to a non-HDCP compliant display
               1. When enabled, the video output shall be a solid green color and an on-screen message stating “HDCP CONTENT” shall be displayed
               2. When enabled, the option shall be provided to display a user-provided image in place of the green video output
               3. When disabled, the output shall be muted
            3. Provide real-time verification of HDCP status for the HDMI inputs and HDMI outputs
               1. Electronically accessible over RS-232, Ethernet, or USB connection
               2. LED indicators on the front panel
      5. Audio Requirements
         1. Provide audio input connections
            1. Two HDMI, embedded
            2. One 5-pole captive screw for analog balanced/unbalanced line level two-channel audio, with gain and attenuation control
         2. Provide audio output connections
            1. Two HDMI, embedded
            2. One 5-pole captive screw for analog balanced/unbalanced line level two-channel audio
            3. For all audio outputs, shall provide output volume control and be configurable for stereo or dual mono
         3. Support extraction of HDMI two-channel PCM audio signals to the analog stereo output, or pass multi-channel and bitstream audio to the HDMI output
         4. Provide a delay in the audio output to match the corresponding video processing delay
         5. Support individual muting of the analog and embedded HDMI audio inputs, and analog and HDMI audio outputs
      6. Control Requirements
         1. Provide control connections
            1. RJ-45: 10/100/1000Base-T Ethernet
            2. 3-pole captive screw: RS-232
            3. Mini USB-B: USB 2.0
         2. Provide alternatives for configuration and operation
            1. On-screen menus navigated using front panel controls
            2. Product configuration software connected via Ethernet or USB
            3. Serial commands sent over Ethernet, RS-232, or USB connection
         3. Support disabling of front panel controls to prevent inadvertent or unauthorized changes to configuration settings
      7. General Requirements
         1. Provide real-time verification of video, HDCP, and audio presence plus power
            1. Directly readable on front panel LEDs
         2. Enclosure shall be rack-mountable, half rack width, and 1RU in height
         3. Shall be equipped with internal 100-240 VAC, 50/60 Hz universal power supply
         4. Shall meet regulatory compliances
            1. Shall meet safety compliances under CE, c-UL, and UL
            2. Shall meet EMI/EMC compliances under CE, C-tick, FCC Class A, ICES, and VCCI
            3. Shall comply with appropriate requirements of RoHS and WEEE
         5. Shall provide three year parts and labor warranty
   2. Approved device shall be the Extron DSC HD-HD 4K PLUS A xi (part number 60-1573-02); no alternates or equals