Product Home
Fiber Optics
Fiber Optic Cable Assemblies
Fiber Optic Extenders Universal Switching Transmitters DisplayPort Extenders HDMI Extenders DVI Extenders RGB and HD Component Extenders 3G-SDI Extenders Standard Definition Video USB Extenders Accessories Fiber Optic Switchers Fiber Optic Matrix Switchers Fiber Optic Bulk Cables Fiber Optic Connectors and Accessories Fiber Optic 4K Systems
2LC SM P
2LC OM4 MM P 2LC SM P

Pro

2LC SM P

LC to LC Bend-Insensitive Singlemode Fiber Optic Cable Assemblies - Plenum

Key Features

Bend-insensitive singlemode fiber
OFNP plenum-rated jacket
Durable duplex zip-cord cable construction
Terminated with industry standard LC connectors
Available in lengths from 1 meter (3.3 feet) to 60 meters (197 feet)
All Features

Image Gallery

Interactive Overview

A&E Specifications

Overview
Video
Description
Specifications
Diagram
Panel Drawing
Downloads

Overview

Extron 2LC SM P bend-insensitive singlemode fiber optic cable assemblies are available in various lengths from 1 meter to 60 meters. Bend-insensitive fiber features a tight bend radius to minimize bending loss and simplify installation. Singlemode fiber's low-loss provides extreme performance to transmit AV signals over very long distances up to 30 km or 18.75 miles.

Video

Description

Specifications

Diagram

Panel Drawing

Downloads

2LC SM P/1

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a one (1) meter (3.3 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/1 (part number 26-670-01), no alternates or equals

2LC SM P/1

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a one (1) meter (3.3 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/1 (part number 26-670-01), no alternates or equals

2LC SM P/3

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a three (3) meter (9.8 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/3 (part number 26-670-03), no alternates or equals

2LC SM P/3

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a three (3) meter (9.8 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/3 (part number 26-670-03), no alternates or equals

2LC SM P/5

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a five (5) meter (16.4 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/5 (part number 26-670-05), no alternates or equals

2LC SM P/5

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a five (5) meter (16.4 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/5 (part number 26-670-05), no alternates or equals

2LC SM P/10

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a ten (10) meter (32.8 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/10 (part number 26-670-10), no alternates or equals

2LC SM P/10

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a ten (10) meter (32.8 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/10 (part number 26-670-10), no alternates or equals

2LC SM P/15

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a fifteen (15) meter (49.2 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/15 (part number 26-670-15), no alternates or equals

2LC SM P/15

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a fifteen (15) meter (49.2 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/15 (part number 26-670-15), no alternates or equals

2LC SM P/20

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a twenty (20) meter (65.6 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/20 (part number 26-670-20), no alternates or equals

2LC SM P/20

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a twenty (20) meter (65.6 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/20 (part number 26-670-20), no alternates or equals

2LC SM P/30

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a thirty (30) meter (98.4 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/30 (part number 26-670-30), no alternates or equals

2LC SM P/30

Provide interconnection for the transmission of high-speed optical digital signals over a duplex singlemode fiber optic cable assembly
1. Duplex singlemode fiber optic cable assembly for transmission of optical digital signals
2. Cable construction requirements
  1. Shall provide two (2) 8.3/125 µm step-index, bend-insensitive singlemode fibers
    1. Glass fiber core diameter of 8.3 µm
    2. Glass fiber outer diameter of 125 µm
  2. Shall provide a 900 µm tight buffer coating surrounding each glass fiber
  3. Shall provide Aramid yarn as the strengthening material surrounding each tight-buffered fiber
  4. Shall provide a 2 mm diameter, OFNP plenum-rated jacket to meet NEC, CSA, and ICEA safety standards, surrounding each tight-buffered fiber and Aramid yarn strengthening material
  5. Shall provide duplex zip-cord cable construction for strength and protection of the glass fiber
3. Termination requirements
  1. Shall be terminated at each end with an industry-standard LC-type fiber optic connector
    1. Pre-polished with an UPC – ultra physical contact end face
  2. Shall be configured with duplex connectors using AB - BA reverse-pair polarity as described in TIA-568
4. Performance requirements
  1. Shall meet or exceed singlemode fiber performance standards
    1. TIA 492CAAA / OS1
    2. ITU G.657.A2; ITU G.657.B2
    3. IEC 60793-2-50, B1.1
  2. Shall provide attenuation of less than 0.5 dB per kilometer at a 1310 nm wavelength
  3. Shall provide attenuation of less than 0.5 dB per kilometer at a 1550 nm wavelength
  4. Shall provide an insertion loss of less than 0.3 dB per 300 meters at 1550 nm
  5. Shall be bend-insensitive fiber for a tight bend radius of 0.3 inches (7.5 mm) with minimal cable losses
5. General requirements
  1. Shall be available in a thirty (30) meter (98.4 foot) length
  2. Shall provide an outer dimeter of 0.08" ±0.008" (2.0 mm ±0.2 mm)
  3. Shall meet regulatory compliance
    1. ETL/c-ETL OFNP FT6 (plenum rated)
  4. Shall provide a lifetime limited performance warranty
6. Approved cable shall be Extron 2LC SM P/30 (part number 26-670-30), no alternates or equals

Add Item to Cart

Order Message Number

Part #

Note: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.

Qty

Current Total:

View Cart

2LC SM P -

Product Details

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.