ASA 101 |
|
Audio |
NOTE | | All audio specifications were tested with a stereo audio source, 50 ohm output impedance, and a sink with a 10k ohm load. Both left and right input channels were connected to the source at all times, even in tests where a signal was present at one input only. |
|
Gain | Generally unity gain with unbalanced output, +6 dB gain with balanced output. See the table below. Entries with an asterisk (*) indicate the input was set to no signal, but was still connected to the audio source.
|
Frequency response | 280 Hz to 20 kHz, ±0.5 dB, full frequency range THD+N <1%, with -10 dBV input |
THD + Noise | 0.1% @ 1 kHz, <1% @ 280 Hz to 20 kHz |
S/N | 130 dB at maximum output |
Stereo channel separation | >80 dB @ 1 kHz, >60 dB @ 20 kHz |
|
Audio input |
Number/signal type | 1 stereo, unbalanced |
Connectors | 1 pair of male RCA (tip-ring) |
Impedance | 300 ohms (with both input connectors connected to a stereo source) |
Nominal level | -10 dBV (316 mV) |
Maximum level | +7 dBV (2.2 V) @ 1 kHz, (unbalanced) at <1% THD+N |
NOTE | | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
Audio output |
Number/signal type | 1 mono, balanced/unbalanced |
Connectors | (1) 3.5 mm direct insertion captive screw connector, 3 pole |
Impedance | 80 ohms |
Nominal level | -10 dBV (316 mV) |
Maximum level | +7 dBV (2.2 V) @ 1 kHz, (unbalanced) at <1% THD+N |
|
General |
Power | Not powered |
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Rack mount | Can be attached to any flat surface with supplied Velcro® |
Enclosure type | Molded plastic |
Enclosure dimensions | 0.7" H x 1.0" W x 1.5" D 1.8 cm H x 2.5 cm W x 3.8 cm D (Depth excludes the 24 inch long pigtail.) |
Product weight | 0.2 lbs (0.1 kg) |
Shipping weight | 1 lb (1 kg) |
Vibration | ISTA 1A in carton (International Safe Transit Association) |
Listings | UL, CUL |
Compliances | CE, FCC Class A, VCCI, AS/NZS, ICES |
MTBF | 30,000 hours |
Warranty | 3 years parts and labor |
NOTE | | All nominal levels are at ±10%. |
|
NOTE | | Specifications are subject to change without notice. |
|
(7.52-031506-D2) |