DMP 44 LC

4x4 Digital Matrix Processor

Key Features

4x4 line level audio matrix mixer
DSP audio signal processing
24-bit/48 kHz analog-to-digital and digital-to-analog converters
Fixed, low latency DSP processing
Building Blocks processor settings

Model	Version Description	Part #
DMP 44 LC	4x4 Digital Matrix Processor	60-1095-01

The Extron DMP 44 LC Digital Matrix Processor is a compact 4x4 audio mixer featuring a digital signal processing platform for audio signal routing and control. The DMP 44 LC features four line level inputs and outputs, all balanced or unbalanced. It offers several audio DSP tools for mixing, routing, and room optimization. Quick and intuitive configuration using the DSP Configurator™ Software allows the DMP 44 LC to be installed in very little time. The DMP 44 LC is ideal for presentation applications that require line level audio matrix mixing with DSP in a small form factor.

DSP

The DSP built into the DMP 44 LC provides wide dynamic range and utilizes 24-bit audio converters with 48 kHz sampling to maintain audio signal transparency. Several convenient, easy-to-configure tools are available: level controls, high and low pass filters, parametric EQ filters, bass and treble shelving filters, compressor, limiter, and ducker.

Easy-to-Use DSP Configurator Software

The DSP Configurator Software features an intuitive on-screen layout that offers fast access to all of the digital audio signal processing tools as well as matrix mixing. Designers can quickly get a snapshot view of the entire audio system, including processing blocks and routing assignments, all at once.

Flexible Routing

The DMP 44 LC features four mono line inputs that can be matrix mixed into any of the four output buses to create finely tuned audio zones for the corresponding outputs. This audio matrix mixing is ideal for many applications, such as combining two independent stereo audio sources or switchers into a single amplifier or recording system, or in a divisible room installation for feeding a switcher's audio output to the sound system for each room.

Versatile Control Options

The DMP 44 LC can conveniently be controlled and configured via RS-232 serial control or USB. It also includes digital input ports, which allow for external triggering.

Features

4x4 line level audio matrix mixer — The DMP 44 LC is a compact matrix mixer with DSP. It features four line level inputs that can be processed, mixed, and routed to four line level outputs.

Inputs: Four balanced or unbalanced line level on two 3.5 mm, 6-pole captive screw connectors

Outputs: Four balanced or unbalanced line level on two 3.5 mm, 6-pole captive screw connectors

DSP audio signal processing — The DMP 44 LC provides digital signal processing on all inputs and outputs.

24-bit/48 kHz analog-to-digital and digital-to-analog converters — High performance converters preserve audio signal integrity in input and output signal conversion, while maintaining latency under 1 ms.

Fixed, low latency DSP processing — Input to output latency is fixed within the DMP 44 LC, regardless of the number of active channels or processes. Fixed, low latency processing keeps audio in sync with video, and prevents distractions to the presenter resulting from delayed live audio.

DSP Configurator™ Software — A powerful yet user-friendly PC-based software tool for managing all audio operations of the DMP 44 LC. It enables complete setup and configuration of digital audio processing tools as well as routing and mixing.

Intuitive Graphical User Environment — The DSP Configurator Software features a Graphical User Environment that offers a clear view of all inputs and outputs, audio processing blocks, routing, and mix points in a single window. This allows a designer or installer to quickly view an audio configuration without having to access multiple windows or menus.

Front panel USB configuration port — Enables easy configuration via the DSP Configurator Software without having to access the mixer's rear panel.

RS-232 control port — Using serial commands, the DMP 44 LC can be integrated into a control system. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming.

Building Blocks processor settings — A collection of pre-designed processor settings optimized for a specific type of input or output device, such as microphones and Extron speakers, with preset levels, filters, dynamics, and more. Flexible Building Blocks are available on each I/O strip and allow system designers to fully customize and save their own Building Blocks, further streamlining audio system design and integration.

Console View with gain settings, metering, and routing in a single window — An optional view within the DSP Configurator Software that allows system designers to see all gain settings and routing, together with live metering in a single window. Console View provides overload indication, numeric values for levels, and also mute status for each input, gain stage, mix point, and output, so that settings between inputs and outputs can be easily compared and adjusted in one view.

Three digital input ports for remote triggering — Three configurable digital input ports are provided, so that external switches and sensors can be connected to the mixer for remote triggering of functions within the DMP 44 LC.

Live and Emulate operation modes with configuration file saving — Live mode allows integrators to connect to the DMP 44 LC and make live parameter adjustments while hearing or metering them in real-time. This avoids the need to compile and upload a configuration file to the DSP. Emulation mode allows settings to be configured offline, then uploaded to the DMP 44 LC. The software also downloads configuration files from the mixer for archiving.

16 DSP Configurator presets — Using the DSP Configurator Software, any or all parameters for DSP processing, levels, or audio routing can be saved as presets.

Group masters — The DMP 44 LC provides the capability to consolidate gain or mute control throughout the system. Gain or mute controls can be selected and added to a group master, which can then be controlled by a single master fader or mute control. Up to 16 group masters can be created.

Soft limits provide optimal group master adjustment range — The group master volume range can be limited using soft limits to maintain optimal minimum and maximum levels when using external volume control. This prevents operators from over or under-adjusting levels when using digital input or RS-232 control. The DSP Configurator Software provides quick drag-and-drop adjustment of soft limits from the Group Controls screen.

SpeedNav™ keyboard navigation — SpeedNav enables user-friendly, keyboard-based navigation of the DSP Configurator Software without the need for a mouse or touchpad. Using keyboard navigation keys and shortcuts, the user can access any input or output, mix point, and all audio DSP tools. Using only the keyboard for software access can help expedite audio system setup and optimization while on-site using laptop PCs.

Rack-mountable 1U, quarter rack width metal enclosure

External Extron Everlast™ power supply included, replacement part #70-1175-01 — Provides worldwide power compatibility with high‑demonstrated reliability and low power consumption. This power supply is compatible with the ZipClip 50 Mounting Kit.

Extron Everlast Power Supply is covered by a 7‑year parts and labor warranty

OPTIONAL ACCESSORIES
	Half Rack Shelf System	Half-Rack Width Rack Shelf and Accessories
	ZipClip 50	Mounting Kit for PS 1205 C Power Supply

OPTIONAL ACCESSORIES

Half Rack Shelf System

Half-Rack Width Rack Shelf and Accessories

ZipClip 50

Mounting Kit for PS 1205 C Power Supply

RELATED PRODUCTS
	DSP Configurator Software	DSP Application Software
	MVC 121 Plus	Three Input Stereo Mixer with DSP

SIMILAR PRODUCTS
	DMP 64 Plus	6x4 ProDSP Digital Matrix Processors
	XMP 240	Dante Audio DSP Matrix Processor
	DMP 128 FlexPlus	ProDSP Dante Digital Matrix Processors
	DMP 128 Plus	12x8 ProDSP Digital Matrix Processors
	DMP 128	12x8 ProDSP™ Digital Matrix Processors
	DMP 64	6x4 ProDSP™ Digital Matrix Processor

SIMILAR PRODUCTS

DMP 64 Plus

6x4 ProDSP Digital Matrix Processors

XMP 240

Dante Audio DSP Matrix Processor

DMP 128 FlexPlus

ProDSP Dante Digital Matrix Processors

DMP 128 Plus

12x8 ProDSP Digital Matrix Processors

DMP 128

12x8 ProDSP™ Digital Matrix Processors

DMP 64

6x4 ProDSP™ Digital Matrix Processor

Specifications

DMP 44 LC

Audio

Gain

Unbalanced output: -6 dB; balanced output: 0 dB

Frequency response

20 Hz to 20 kHz, ±0.3 dB

THD + Noise

<0.03% @ 1 kHz, at maximum output level

S/N

>100 dB, 20 Hz to 20 kHz, at maximum output, unweighted

Crosstalk

<-90 dB @ 1 kHz, fully loaded

CMRR

>60 dB @ 1 kHz

Audio input

Number/signal type

4 mono, line, balanced/unbalanced

Connector

(2) 3.5 mm captive screw connectors, 6 pole

Impedance

>10k ohms unbalanced/balanced

Nominal level

+4 dBu when level is set to 0 dB gain; adjustable from -20 dBu to +4 dBu

Maximum level

+21 dBu, balanced, when input gain is set to 0 dB

Volume range

-18 dB to +24 dB, line input, adjustable per input

NOTE	0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio processing

D/A conversion

24 bit, 48 kHz sampling

Audio output

Number/signal type

4 mono, line, balanced/unbalanced

Connectors

(2) 3.5 mm captive screw connectors, 6 pole

Impedance

50 ohms unbalanced, 100 ohms balanced

Gain error

±0.2 dB channel to channel

Maximum level (Hi-Z)

>+21 dBu balanced, >+15 dBu unbalanced

Control/remote — audio processor

Serial host control port

1 bidirectional RS-232: 3.5 mm captive screw connector, 6 pole (uses 3 poles) (shared with digital input)

Baud rate and protocol

9600 to 115200 baud (38400 baud = default), 8 data bits, 1 stop bit, no parity, no flow control

Serial control pin configuration

Pin 1 = Tx, 2 = Rx, 3 = GND

USB control ports

1 front panel female mini USB B

USB standards

USB 2.0, low speed

Program control

Extron control/configuration program for Windows^®
Extron Simple Instruction Set (SIS^™)

Control — digital input ports

Number/type

3 digital input (configurable)

Connector

(1) 3.5 mm captive screw connector, 6 pole (shared with RS-232 port, uses 4 poles)

Pin configuration

3 = GND; 4, 5, 6 = digital inputs 1, 2, 3

Digital inputs

Input voltage range

0-24 VDC

Input impedance

10k ohms

Threshold low to high

>2.0 VDC

Threshold high to low

<0.8 VDC

General

Power

External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 0.5 A, 6 watts

Power consumption

3.6 watts

Ambient temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling

Convection, no vents

Mounting

Rack mount

Yes, with optional 1U rack shelf

Furniture mount

Yes, with optional under-desk mounting kit

Enclosure type

Metal

Enclosure dimensions

1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)

Product weight

0.6 lbs (0.3 kg)

Regulatory compliance

CE, C-tick, c-UL, UL, FCC Class A, ICES, KC, VCCI, RoHS, WEEE

Product warranty

3 years parts and labor

Everlast power supply warranty

7 year parts and labor

NOTE	All nominal levels are at ±10%.

NOTE	Specifications are subject to change without notice.

(5795-D7)

Shipping Dimensions and Weights
Part #	Height	Width	Depth	Weight
60-1095-01	2.75" (7.0 cm)	10.12" (25.7 cm)	7.43" (18.9 cm)	1.8 lbs (0.82 kg)

DMP 44 LC

DSP

Easy-to-Use DSP Configurator Software

Flexible Routing

Versatile Control Options

Features

Specifications

Diagram

Panel Drawing