MAV Plus 6432 A Retired

64x32 Matrix Switchers for Stereo or Mono Audio*

Key Features

Switches both balanced and unbalanced audio
Audio input gain and attenuation
Audio output volume adjustment and muting
Ethernet monitoring and control

Model	Version Description	Part #
MAV Plus 6432 AM	64x32 Mono Audio	60-766-10	Retired
MAV Plus 6432 A	64x32 Stereo Audio	60-766-15	Retired

This product has been retired.

The Extron MAV Plus 6432 Audio Matrix Switchers are designed to route balanced or unbalanced audio signals. Both 64x32 matrix switchers feature audio input gain and attenuation, audio output volume adjustment, and Ethernet control technology.

Ethernet Control

The MAV Plus Series is equipped with an integrated, high performance Web server that provides technical support personnel with the ability to receive service and failure messages through an e-mail-enabled cell phone, PDA, pager, or e-mail account. Utilizing Ethernet control, the help desk can also view embedded Web pages to manage, monitor, and troubleshoot the switcher for the following:

AV Resource Management

Remotely select input and output ties for audio only, video only, or audio and video
Name and select global I/O presets
Set audio input and output volume levels
Upload firmware updates via the Internet

Operating Status and Diagnostics

Monitor primary and redundant power supply voltages
Monitor internal product operating temperature
Recall firmware revision and other data for improved Help Desk support
Obtain immediate notification via e-mail for power supply failure, overheating, and other critical service information

*Notes:
1. MAV Plus A and AM series matrix switchers, 32x48 to 64x64, do not include a QS-FPC™ - QuickSwitch Front Panel Controller.

2. When used to create an AV or RGBHV+A matrix switcher system, the I/O size of MAV Plus A and AM models must match, or be smaller than, the I/O size of the video matrix switcher.

Features

Inputs: Captive screw connectors

Outputs: Captive screw connectors

Video genlock — Audio switching can be synchronized with video switching for clean, accurate audio-follow-video transitions.

View I/O mode — Allows users to easily see which individual inputs and outputs are actively connected. Available via RS-232 or Ethernet.

Global presets — Frequently used I/O configurations may be saved and recalled via RS-232 or Ethernet. This time-saving feature allows you to set up I/O configurations and store them in memory for future use.

I/O grouping — Allows the matrix switcher to be virtually divided into smaller sub-switchers, making installation and control easier. I/O grouping allows specific outputs, like those designated for a specific video format, to be grouped together.

Rooming — All models can be programmed to group selected outputs into specific "rooms," each with its own set of unique presets. Each room can support up to 16 outputs. A total of 10 rooms, with 10 presets per room, are available.

Switches both balanced and unbalanced audio — Accepts both signal types on captive screw connectors.

Audio input gain and attenuation — Allows users to set the level of gain or attenuation for each audio input channel, eliminating noticeable volume differences when switching between sources.

Audio output volume adjustment and muting — Each individual output has volume control adjustment via RS-232 or Ethernet. Audio output levels can be set dynamically at different levels to feed the audio amplifier, thus eliminating the need for a preamplifier in many system designs.

Ethernet monitoring and control — Engineered to meet the needs of professional AV environments, Ethernet control enables the MAV Plus Series to be proactively monitored and managed over a LAN, WAN, or the Internet, using standard TCP/IP protocols. Ethernet control provides for remote selection of input and output ties, adjustment and control of audio input and output levels, and advanced system diagnostics.

RS-232 and RS-422 control port — Using serial commands, the MAV Plus Series can be controlled and configured via the included Windows-based control software, or integrated into a control system. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming. The RS-232 and RS-422 port also makes it easy to install firmware updates.

Control software — Provides a graphical, drag-and-drop interface for I/O configuration and other customization functions via RS-232 and RS-422 remote control. Also offers an emulation mode for configuration of an off-site matrix switcher. The I/O configuration may be saved for future downloading to the matrix switcher.

Optional control panels and keypads — Provide the flexibility to control a MAV Plus Series matrix switcher from a remote location.

Rack-mountable metal enclosure — 7U, full rack width

Highly reliable, energy-efficient internal universal power supply — The 100-240 VAC, 50/60 Hz, international power supply provides worldwide power compatibility with high demonstrated reliability.

Redundant power supplies — Primary and back-up power supplies are internally mounted. The power supply system is configured to automatically switch over to a hot spare power supply if the primary power supply fails. This means no loss of functionality in the event of a primary power supply malfunction.

Specifications

MAV Plus 64 Series

Video — video BMEs

Routing

64 x 64, 64 x 48, 64 x 32, 48 x 64, 48 x 48, 48 x 32, 32 x 48, or 32 x 64 matrix

Gain

Unity

Bandwidth

150 MHz (-3 dB), fully loaded

0 - 10 MHz

No more than +0.1 dB to -0.1 dB

0 - 130 MHz

No more than +0.1 dB to -0.1 dB

Crosstalk

-80 dB @ 1 MHz, -62 dB @ 10 MHz, -52 dB @ 30 MHz

Switching speed

200 ns (max.)

Video input — video BMEs

Number/signal type

32, 48, or 64 composite video

Connectors

32, 48, or 64 female BNC

Nominal level

1 Vp-p for composite video

Minimum/maximum levels

Analog: 0.5 V to 2.0 Vp-p with no offset

Impedance

75 ohms

Horizontal frequency

15 kHz to 150 kHz

Vertical frequency

30 Hz to 150 Hz

Return loss

<-30 dB @ 5 MHz

DC offset (max. allowable)

1.5 V

Video output — video BMEs

Number/signal type

32, 48, or 64 composite video

Connectors

32, 48, or 64 female BNC

Nominal level

1 Vp-p for composite video

Minimum/maximum levels

0 V to 2.0 Vp-p (follows input)

Impedance

75 ohms

Return loss

<-30 dB @ 5 MHz

DC offset

±5 mV with input at 0 offset

Switching type

Vertical interval

Sync — video BMEs

Genlock connectors

1 female BNC

Standards

NTSC 3.58, NTSC 4.43, PAL, SECAM

Audio — audio BMEs

Routing

(32, 48, or 64) x (32, 48, or 64) stereo or mono matrix

NOTE	Both stereo (2 channel) and mono (1 channel) audio models are available.

Gain

Unbalanced output: -6 dB; balanced output 0 dB

Frequency response

20 Hz to 20 kHz, ±0.05 dB

THD + Noise

0.03% @ 1 kHz at nominal level

S/N

>90 dB, balanced, at maximum output (21 dBu), unweighted

Crosstalk

<-80 dB @ 1 kHz, fully loaded

Stereo channel separation

>80 dB @ 1 kHz

CMRR

>75 dB @ 20 Hz to 20 kHz

Audio input — audio BMEs

Number/signal type

32, 48, or 64 stereo balanced/unbalanced or
32, 48, or 64 mono balanced/unbalanced

Connectors

Stereo models

(32, 48, or 64) 3.5 mm captive screw connectors, 5 pole

Mono models

(32, 48, or 64) 3.5 mm captive screw connectors, 3 pole

Impedance

>10k ohm, balanced/unbalanced, DC coupled

Nominal level

-10 dBV (316 mVrms)

Maximum level

+19.5 dBu, (balanced or unbalanced) at 1% THD+N

Input gain adjustment

-18 dB to +24 dB, adjustable per input by RS-232/422, Ethernet, or front panel

NOTE	0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output — audio BMEs

Number/signal type

32, 48, or 64 stereo balanced/unbalanced or
32, 48, or 64 mono balanced/unbalanced

Connectors

Stereo models

(32, 48, or 64) 3.5 mm captive screw connectors, 5 pole

Mono models

(32, 48, or 64) 3.5 mm captive screw connectors, 3 pole

Impedance

50 ohms unbalanced, 100 ohms balanced

Gain error

±0.1 dB channel to channel

Maximum level (Hi-Z)

>+21 dBu, balanced or unbalanced at 0.1% THD+N

Maximum level (600 ohm)

>+15 dBm, balanced or unbalanced at 0.1% THD+N

Output volume range

0 to 64 (-98 dB to 0 dB) in 0.5 dB increments from steps 1 to 64, 35 dB increment from step 0 to 1

Control/remote — switcher

Serial control port

1 RS-232 or RS-422 female 9-pin D connector (rear panel)
1 RS-232 2.5 mm phone jack (front panel)

Baud rate and protocol

9600 (default), 19200, 38400, 115200 baud (adjustable); 8 data bits, 1 stop bit, no parity

Serial control pin configurations

RS-232: 2 = Tx, 3 = Rx, 5 = GND
RS-422: 2 = Tx-, 3 = Rx-, 5 = GND, 7 = Rx+, 8 = Tx+

Ethernet control port

1 female RJ-45 connector

Ethernet data rate

10/100Base-T, half/full duplex with autodetect

Ethernet protocol

ARP, ICMP (ping), TCP/IP, DHCP, HTTP, Telnet

Program control

Extron control/configuration program for Windows^®Extron Simple Instruction Set (SIS^™)
Microsoft^® Internet Explorer, Telnet

General

Power

100 VAC to 240 VAC, 50-60 Hz, internal, primary and redundant

Video models

110 watts at 115 VAC, 60 Hz

All audio models

195 watts at 115 VAC, 60 Hz

NOTE	A redundant power supply is standard.

Cooling

Video models

Convection, vents on right and left sides

Audio models

Fan, right to left (viewed from the front panel)

Ambient temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Mounting

Rack mountable with included parts

Enclosure type

Metal

Enclosure dimensions

Video BMEs

10.5" H x 17.0" W x 14.1" D (6U high, full rack wide)
(26.7 cm H x 43.2 cm W x 35.8 cm D)

Audio BMEs

12.25" H x 17.0" W x 14.1" D (7U high, full rack wide)
(31.1 cm H x 43.2 cm W x 35.8 cm D)

Product weight per BME

32 x 48 through 64 x 64 Series video BMEs

18.0 lbs (8.2 kg)

32 x 48 through 64 x 64 Series stereo audio BMEs

19.0 lbs (8.6 kg)

32 x 48 through 64 x 64 Series mono audio BMEs

18.5 lbs (8.4 kg)

Shipping weight per BME

32 x 48 through 64 x 64 Series video BMEs

29 lbs (13 kg)

32 x 48 through 64 x 64 Series stereo audio BMEs

31 lbs (14 kg)

32 x 48 through 64 x 64 Series mono audio BMEs

30 lbs (14 kg)

DIM weight, international, per BME

44 lbs (20 kg)

Vibration

ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

Safety

CE, c-UL, UL

EMI/EMC

CE, C-tick, FCC Class A, ICES, VCCI

Product warranty

3 years parts and labor

NOTE	All nominal levels are at ±10%.

NOTE	Specifications are subject to change without notice.

(8.0-111912-D8)

MAV Plus 6432 A Retired

Ethernet Control

AV Resource Management

Operating Status and Diagnostics

Features

Specifications

Diagram

Panel Drawing