MAV SVA Series Retired

S-Video and Stereo Audio Matrix Switchers
Key Features
  • 150 MHz (-3 dB) video bandwidth, fully loaded
  • Video genlock
  • Audio input gain and attenuation
  • Audio breakaway
  • Optional IR 501 remote control
The Extron MAV SVA Series
Model Version Description Part #
 MAV 44 SVA 4x4 S-Video & Stereo Audio 60-553-22 Retired
 MAV 84 SVA 8x4 S-Video & Stereo Audio 60-554-22 Retired
 MAV 88 SVA 8x8 S-Video & Stereo Audio 60-555-22 Retired
 MAV 48 SVA 4x8 S-Video & Stereo Audio 60-605-22 Retired

This product has been retired.

The Extron MAV SVA Series matrix switchers are designed to route S-video and balanced/unbalanced stereo audio signals. They are ideal for use in a wide range of matrix switching applications, including museums, sports bars, videoconferencing rooms, and home theaters.

Features

  • Inputs: Video on female 4-pin mini DIN connectors; audio on captive screw connectors
  • Outputs: Video on female 4-pin mini DIN connectors; audio on captive screw connectors
  • 150 MHz (-3 dB) video bandwidth, fully loaded — Ensures switching and distribution of video signals without degradation. MAV Series matrix switchers provide a minimum 150 MHz (-3 dB) of video bandwidth at full performance capability when one input drives all outputs.
  • Video genlock — Allows for vertical interval switching and enables smooth, seamless transitions when switching between synchronous video sources.
  • Compatible with NTSC 3.58, NTSC 4.42, PAL, and SECAM video — Provides for worldwide compatibility.
  • Switches both balanced and unbalanced stereo audio — Accepts both signals on captive screw connectors.
  • Audio input gain and attenuation — Allows users to set the level of gain or attenuation for each audio input channel, eliminating noticeable differences when switching between sources.
  • Audio breakaway — Provides the capability to break an audio signal away from its corresponding video signal, allowing the audio and video signals from one source to be switched to different destinations.
  • QS-FPC™ - QuickSwitch Front Panel Controller — Provides a discrete button for each input and output, allowing for simple, intuitive operation.
  • View I/O mode — Easily view which inputs and outputs are actively connected.
  • Global presets — Frequently used I/O configurations may be saved and recalled either from the QuickSwitch Front Panel Controller or RS-232 serial control. This time-saving feature allows you to set up I/O configurations and store them in memory for future use.
  • RS-232 control port — Using serial commands, the MAV Series can be controlled and configured via the included Windows-based control software, or integrated into a control system. Extron products use the SIS™ - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming. The RS-232 port also makes it easy to install firmware updates.
  • Optional IR 501 remote control
  • Control software — Provides a graphical, drag-and-drop interface for I/O configuration and other customization functions via RS-232 remote control. This software also offers an emulation mode for configuration of an offsite matrix switcher; the I/O configuration may be saved for future downloading to the matrix switcher.
  • Optional remote control — Optional X/Y control panels, bus control panels, and keypads provide the flexibility to control a MAV Series matrix switcher from a remote location.
  • Front panel security lockout — Prevents unauthorized use when the matrix switcher is installed in an unsecured environment where easy access is not desirable. In lockout mode, a special button combination is required to operate the front panel.
  • 1U, rack-mountable metal enclosure
  • Highly reliable, energy-efficient internal universal power supply — The 100-240 VAC, 50/60 Hz, international power supply provides worldwide power compatibility with high demonstrated reliability.
INCLUDED ACCESSORIES
  MBD 149 1U, Full Rack Width, Rack Mount and Through-Desk Kit for Four-Piece Enclosure 70-077-03
OPTIONAL ACCESSORIES
  CSR 6 Captive Screw to RCA Female Audio Adapter
  SVHSM-2BNCF S-Video Male to 2 BNC Female Adapter

Specifications

MAV 44-88 Series
Video — composite video and S-video models
   Routing 
      MAV 44 Series 4 x 4 matrix
      MAV 48 Series 4 x 8 matrix
      MAV 84 Series 8 x 4 matrix
      MAV 88 Series 8 x 8 matrix
   Gain Unity
   Bandwidth 150 MHz (-3 dB), fully loaded
   Differential phase error <0.1° at 3.58 MHz and 4.43 MHz
   Differential gain error <0.1% at 3.58 MHz and 4.43 MHz
   Crosstalk <-50 dB @ 5 MHz
   Switching speed 20 ms (max.)
Video input — composite video and S-video models
   Number/signal type 
      MAV 44 AV, MAV 44 AV RCA, MAV 48 AV, MAV 48 AV RCA 4 composite video
      MAV 44 SVA, MAV 44 SVA RCA, MAV 48 SVA, MAV 48 SVA RCA 4 S-video
      MAV 84 AV, MAV 84 AV RCA, MAV 88 AV, MAV 88 AV RCA, MAV 88 V 8 composite video
      MAV 84 SVA, MAV 84 SVA RCA, MAV 88 SVA, MAV 88 SVA RCA 8 S-video
   Connectors 
      MAV 44/48 composite video models 4 female BNC
      MAV 44/48 S-video models 4 female 4-pin mini DIN
      MAV 44/48 composite video models 8 female BNC
      MAV 84/88 S-video models 8 female 4-pin mini DIN
   Nominal level 1 Vp-p for Y of S-video, and for composite video
0.3 Vp-p for C of S-video
   Minimum/maximum levels Analog: 0.4 V to 2.0 Vp-p with no offset at unity gain
   Impedance 75 ohms
   Return loss
      Composite video <-38 dB @ 0 to 10 MHz
      S-video <-25 dB @ 0 to 10 MHz
   DC offset (max. allowable) 5 V
   External sync (genlock) 0.2 V to 0.4 Vp-p
   Input coupling AC coupling only
Video output — composite video and S-video models
   Number/signal type
      MAV 44 AV, MAV 44 AV RCA, MAV 84 AV, MAV 84 AV RCA 4 composite video
      MAV 44 SVA, MAV 44 SVA RCA, MAV 84 SVA, MAV 84 SVA RCA 4 S-video
      MAV 88 AV, MAV 88 AV RCA, MAV 88 V, MAV 48 AV, MAV 48 AV RCA 8 composite video
      MAV 88 SVA, MAV 88 SVA RCA, MAV 48 SVA, MAV 48 SVA RCA 8 S-video
   Connectors 
      MAV 44/84 composite video models 4 female BNC
      MAV 44/84 S-video models 4 female 4-pin mini DIN
      MAV 48/88 composite video models 8 female BNC
      MAV 48/88 S-video models 8 female 4-pin mini DIN
   Nominal level 1 Vp-p for Y of S-video, and for composite video
0.3 Vp-p for C of S-video
   Minimum/maximum levels 0.4 V to 2.0 Vp-p (follows input)
   Impedance 75 ohms
   Return loss
      Composite video <-40 dB @ 5 MHz
      S-video <-25 dB @ 5 MHz
   DC offset 15 mV typical (per output enabled with 75 ohm termination) with input at 0 offset
   Switching type Vertical interval
Sync — composite video and S-video models
   Genlock connectors 2 female BNC
   Standards NTSC 3.58, NTSC 4.43, PAL, SECAM
Audio — audio models
   Routing 
      MAV 44 Series 4 x 4 stereo matrix
      MAV 48 Series 4 x 8 stereo matrix
      MAV 84 Series 8 x 4 stereo matrix
      MAV 88 Series 8 x 8 stereo matrix
   Gain Adjustable; the default is unity. Unity gain occurs for all RCA connector models. In all other models with captive screw connectors, unity gain occurs when the switcher is configured for balanced output.
   Frequency response 20 Hz to 20 kHz, ±0.5 dB
   THD + Noise 1% @ 1 kHz, 0.3% @ 20 kHz at nominal level
   S/N 90 dB at maximum output (unweighted)
   Crosstalk <-65 dB @ 20 kHz, <-80 dB @ 1 kHz or below 60 Hz, fully loaded
   Stereo channel separation >80 dB @ 20 Hz to 20 kHz
   CMRR >75 dB @ 20 Hz to 20 kHz
Audio input — audio models
   Number/signal type 
      MAV 44 AV, MAV 44 SVA, MAV 48 AV, MAV 48 SVA 4 stereo, balanced/unbalanced
      MAV 44 AV RCA, MAV 44 SVA RCA, MAV 48 AV RCA, MAV 48 SVA RCA 4 stereo, unbalanced
      MAV 84 AV, MAV 84 SVA, MAV 88 AV, MAV 88 SVA 8 stereo, balanced/unbalanced
      MAV 84 AV RCA, MAV 84 SVA RCA, MAV 88 AV RCA, MAV 88 SVA RCA 8 stereo, unbalanced
   Connectors 
      MAV 44 AV, MAV 44 SVA, MAV 48 AV, MAV 48 SVA (4) 3.5 mm captive screw connectors, 5 pole
      MAV 44 AV RCA, MAV 44 SVA RCA, MAV 48 AV RCA, MAV 48 SVA RCA 4 pairs of female RCA connectors
      MAV 84 AV, MAV 84 SVA, MAV 88 AV, MAV 88 SVA (8) 3.5 mm captive screw connectors, 5 pole
      MAV 84 AV RCA, MAV 84 SVA RCA, MAV 88 AV RCA, MAV 88 SVA RCA 8 pairs of female RCA connectors
   Impedance >18k ohms unbalanced, 24k ohms balanced, DC coupled
   Nominal level Configurable: +4 dBu (1.23 V, professional level) or -10 dBV (316 mV, consumer level)
   Maximum level >+20 dBu (captive screw models) at 1% THD+N
>+14 dBu (RCA models) at 1% THD+N
   Input gain adjustment –18 dB to +10 dB, adjustable per input; default = 0 dB.
    NOTE     Input gain is referenced to the internal bus signal level. It can be verified by measuring the unbalanced output level when the output level is set to "Consumer".
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — audio models
   Number/signal type 
      MAV 44 AV, MAV 44 SVA, MAV 48 AV, MAV 48 SVA 4 stereo, balanced/unbalanced
      MAV 44 AV RCA, MAV 44 SVA RCA, MAV 48 AV RCA, MAV 48 SVA RCA 4 stereo, unbalanced
      MAV 88 AV, MAV 88 SVA, MAV 48 AV, MAV 48 SVA 8 stereo, balanced/unbalanced
      MAV 88 AV RCA, MAV 88 SVA RCA, MAV 48 AV RCA, MAV 48 SVA RCA 8 stereo, unbalanced
   Connectors 
      MAV 44 AV, MAV 44 SVA, MAV 84 AV, MAV 84 SVA (2) 3.5 mm captive screw connectors, 10 pole
      MAV 44 AV RCA, MAV 44 SVA RCA, MAV 48 AV RCA, MAV 48 SVA RCA 4 pairs of RCA female
      MAV 88 AV, MAV 88 SVA, MAV 48 AV, MAV 48 SVA (4) 3.5 mm captive screw connectors, 10 pole
      MAV 88 AV RCA, MAV 88 SVA RCA, MAV 48 AV RCA, MAV 48 SVA RCA 8 pairs of female RCA
   Impedance 50 ohms unbalanced, 100 ohms balanced
   Gain error <±0.1 dB channel to channel
   Nominal level Configurable: +4 dBu (1.23 V, professional level) or -10 dBV (316 mV, consumer level)
   Maximum level (Hi-Z) >+20 dBu, balanced; >+18 dBu, unbalanced at 1% THD+N at default settings
   Maximum level (600 ohm) >+19 dBm, balanced; >+13 dBm, unbalanced at 1%THD+N at default settings
Control/remote — switcher
   Serial control port RS-232, female 9-pin D connector
   Baud rate and protocol 9600 baud, 8 data bits, 1 stop bit, no parity
   Serial control pin configuration 2 = TX, 3 = RX, 5 = GND, 9 = hardwired IR
   IR controller module IR 501 remote control (optional)
   Program control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)
General
   Power 100 VAC to 240 VAC, 50-60 Hz, 15 watts, internal
   Ambient temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Mounting 
      Rack mount Yes, with included brackets
      Furniture mount Yes, with an optional under-desk mounting kit
   Cooling Convection, no vents
   Enclosure type  Metal
   Enclosure dimensions 1.75" H x 17.4" W x 8.5" D (1U high, full rack wide)
(4.4 cm H x 44.2 cm W x 21.6 cm D)
(Depth excludes connectors.  Width excludes rack ears.)
   Product weight  7.0 lbs (3.2 kg)
   Shipping weight  10 lbs (5 kg)
   Vibration  ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance
      Safety CE, c-UL, UL
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI
   Product warranty 3 years parts and labor
   Everlast power supply warranty 7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(7.6-100109-D11)

Diagram

MAV SVA Series System Diagram

Panel Drawing

MAV SVA Series Panel Drawing