| MTP 1500RL 15HD Series |
|
| Video |
|---|
| Gain | Unity |
| Number/signal type | 1 set of proprietary analog signals |
| Connectors | 1 female RJ-45 |
|
| Video input — see MTP Series transmitters specifications |
|---|
|
| Video output — receivers |
|---|
| Number/signal type | 1 set of proprietary analog signals
1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi- or tri-level sync), S-video, or composite video |
| Connectors | 1 female RJ-45
1 female 15-pin HD |
| Nominal level | 1 V p-p for Y of component video and S-video, and for composite video
0.7 V p-p for RGB and for R-Y and B-Y of component video
0.3 V p-p for C of S-video |
| Minimum/maximum levels | 0.3 V to 1.45 V p-p |
| Impedance | 75 ohms |
| Return loss | <-30 dB @ 5 MHz |
| DC offset | <±35 mV with input at 0 offset |
| Skew compensation | 62 ns |
| Maximum resolution | Up to 1600x1200 and 1080p at 1500'; 1920x1200 and 2048x1080 at 1200' |
|
| Sync |
|---|
| Output type | RGBHV, RGBS, RGsB, RsGsBs |
| Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
| Output level | 0.3 Vp-p for component video (bi-level sync)
0.6 Vp-p for component video (tri-level sync)
TTL: 4.0 V to 5.0 V p-p, unterminated for RGBHV, RGBS |
| Output impedance | 110 ohms |
| Polarity | Positive or negative (switch-selectable) |
|
| Audio — MTP 1500RL 15HD A, MTP 1500RL 15HD A SEQ |
|---|
| Number/signal type | 1 set of proprietary analog signals |
| Connectors | 1 female RJ-45 |
| Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
| Frequency response | 20 Hz to 20 kHz, ±1 dB |
| THD + Noise | 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
| S/N | >70 dB at maximum output (unweighted) |
| Stereo channel separation | >60 dB @ 1 kHz |
| CMRR | >43 dB @ 20 Hz to 20 kHz |
|
| Audio input — See MTP Series transmitters specifications |
|---|
| NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
| Audio output — MTP 1500RL 15HD A, MTP 1500RL 15HD A SEQ |
|---|
| Number/signal type | 2 mono, balanced/unbalanced |
| Connectors | (1) 3.5 mm captive screw connector, 5 pole |
| Impedance | 50 ohms unbalanced, 100 ohms balanced |
| Gain error | ±1 dB channel to channel |
| Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) |
| Maximum level | +18 dBu, unbalanced at 1% THD+N |
|
| Control/remote — external device (pass-through, unidirectional or bidirectional) — RS models only |
|---|
| Serial control ports | |
| Input/output | 1 set of proprietary signals on a female RJ-45 jack |
| Output/input | RS-232 via (1) 3.5 mm, 3 pole captive screw connector |
| Baud rates | Up to 38400 bps at up to 1000' (300 m) |
| Protocol | Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none |
| NOTE | Protocol is mirrored between the transmitter and the receiver. |
|
| Serial control pin configuration | Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND |
|
| General |
|---|
| Recommended cable type | CAT 5/5e/6 (shielded or unshielded) |
| Power supply | External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts
|
| Power input requirements | 12 VDC, 1.0 A max. |
| Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
| Cooling | Convection, vents sides to top |
| Mounting | |
| Rack mount | Yes, with optional 1U rack shelf |
| Wall mount | Yes, with optional wall mounting kit |
| Enclosure type | Metal |
| Enclosure dimensions | 1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.) |
| Product weight | 1 lb (0.5 kg) |
| Shipping weight | 2 lbs (1 kg) |
| Vibration | ISTA 1A in carton (International Safe Transit Association) |
| Regulatory compliance |
| Safety | CE, c-UL, UL |
| EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
| MTBF | 30,000 hours |
| Warranty | 3 years parts and labor |
| NOTE | All nominal levels are at ±10%. |
|
| NOTE | Specifications are subject to change without notice. |
|
| (8.0-061011-D10) |