MTP 15HD A Series |
|
Video |
Gain | Unity |
Number/signal type | 1 set of proprietary analog signals |
Connectors | 1 female RJ-45 |
|
Video input and loop through — transmitters |
Number/signal type | |
  MTP T 15HD A | 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video 1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits) |
  MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM | 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video |
Connectors | |
  MTP T 15HD A | 2 female 15-pin HD |
  MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM | 1 female 15-pin HD |
Nominal level | 1 V p-p for Y of component video and S-video, and for composite video 0.7 V p-p for RGB 0.3 V p-p for R-Y and B-Y of component video, and for C of S-video |
Minimum/maximum levels | 0.3 V to 1.45 V p-p |
Impedance | 75 ohms |
Horizontal frequency | 15 kHz to 130 kHz |
Vertical frequency | 30 Hz to 150 Hz |
Return loss | <-30 dB @ 5 MHz |
DC offset (max. allowable) | 250 mV |
|
Video output — receivers |
Number/signal type | |
  MTP R 15HD A | 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video |
  MTP RL 15HD A, MTP RL 15HD A SEQ | 1 set of proprietary analog signals 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video |
Connectors | |
  MTP R 15HD A | 1 female 15-pin HD |
  MTP RL 15HD A, MTP RL 15HD A SEQ | 1 female RJ‑45 1 female 15-pin HD |
Nominal level | 1 V p-p for Y of component video and S-video, and for composite video 0.7 V p-p for RGB 0.3 V p-p for R-Y and B-Y of component video, and for C of S-video |
Minimum/maximum levels | 0.3 V to 1.45 V p-p |
Impedance | 75 ohms |
Return loss | <-30 dB @ 5 MHz |
DC offset | <±35 mV with input at 0 offset |
|
Sync |
Input type (transmitters) | RGBHV, RGBS, RGsB, RsGsBs |
Output type (receivers) | RGBHV, RGBS, RGsB, RsGsBs |
Standards | NTSC 3.58, NTSC 4.43, PAL, SECAM |
Input level (transmitter) | 3.5 V to 5.5 V p-p, unterminated |
Output level (receivers) | 4.0 V to 5.0 V p-p, unterminated |
Input impedance (transmitter) | 573 ohms ±5% |
Output impedance (receivers) | 110 ohms |
Max. input voltage (transmitter) | 5.5 V p-p |
Polarity | |
  Transmitter | Positive or negative (follows input polarity) |
  Receivers | Positive or negative (switch-selectable) |
|
Audio — all models |
Number/signal type | 1 set of proprietary analog signals |
Connectors | 1 female RJ-45 |
Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
Frequency response | 20 Hz to 20 kHz, ±1 dB |
THD + Noise | 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
S/N | >70 dB at maximum output (unweighted) |
Stereo channel separation (MTP T 15HD A AAP, MTP T 15HD A D, | MTP T 15HD A WM) >60 dB @ 1 kHz |
CMRR | >43 dB @ 20 Hz to 20 kHz |
|
Audio input — transmitters |
Number/signal type | 1 stereo, unbalanced |
Connectors | (1) 3.5 mm mini stereo jack |
Impedance | >10k ohms, unbalanced |
Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) |
Maximum level | +18 dBu, (unbalanced) at 1%THD+N |
NOTE | | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
Audio output — MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM local stereo output |
Number/signal type | 1 stereo, balanced/unbalanced |
Connectors | (1) 3.5 mm direct insertion captive screw connector, 5 pole |
Impedance | 50 ohms unbalanced, 100 ohms balanced |
Gain error | ±1 dB channel to channel |
Maximum level (Hi-Z) | >+23 dBu, balanced or unbalanced at 1% THD+N |
Maximum level (600 ohm) | >+17 dBm, balanced or unbalanced at 1% THD+N |
|
Audio output — receivers |
Number/signal type | 2 mono, balanced/unbalanced |
Connectors | (1) 3.5 mm captive screw connector, 5 pole |
Impedance | 50 ohms unbalanced, 100 ohms balanced |
Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) |
Maximum level | +18 dBu, unbalanced at 1% THD+N |
|
General |
External power supply | 100 VAC to 240 VAC, 50/60 Hz, external, autoswitchable; to 12 VDC, 1 A, regulated |
Power input requirements | 12 VDC, 0.5 A |
Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Rack mount | |
  MTP T 15HD A, MTP R 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ | Yes, with optional 1U rack shelf, part #60-190-01 or 60-604-01; or VersaTools® rack shelf, part #60-190-20 or 60-604-20. Also furniture mountable with optional Mini Under-Desk Mounting Kit, part #70‑212‑01; or projector mountable with optional projector mounting kit, part #70‑217‑01 |
  MTP T 15HD A AAP | No, but wall or furniture mountable with optional AAP mounting faceplates that have double space high AAP opening |
  MTP T 15HD A D | No, but wall or furniture mountable in a Decora® -style opening |
  MTP T 15HD A WM | No, but wall or furniture mountable in a 1-gang opening |
Enclosure type | Metal |
Enclosure dimensions | |
  MTP T 15HD A, MTP R 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ | 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide) 4.3 cm H x 10.9 cm W x 7.6 cm D (Depth excludes connectors.) |
  Faceplates | |
    MTP T 15HD A AAP | 1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D) (double space high AAP plate) |
    MTP T 15HD A D | 2.6" H* x 1.3" W x 0.1" D (6.6 cm H* x 3.3 cm W x 0.3 cm D) (Fits the opening in a 1 gang Decora faceplate. *Height is 3.8" [9.7 cm] including mounting tabs.) |
    MTP T 15HD A WM | 4.5" H x 2.8" W x 0.1" D (11.4 cm H x 7.1 cm W x 0.3 cm D) (1 gang) |
  Device (AAP, D, and WM models) | 2.7" H x 1.4" W x 1.4" D (6.9 cm H x 3.6 cm W x 3.6 cm D) (Depth excludes connectors.) |
Product weight | 0.4 lbs (0.2 kg) |
Shipping weight | 2 lbs (1 kg) |
Vibration | ISTA 1A in carton (International Safe Transit Association) |
Listings | UL, CUL |
Compliances | CE, FCC Class A, VCCI, AS/NZS, ICES |
MTBF | 30,000 hours |
Warranty | 3 years parts and labor |
NOTE | | All nominal levels are at ±10% |
|
NOTE | | Specifications are subject to change without notice. |
|
(7.52-040907-D8) |