P/2 DA2 WM Retired

Wall-Mountable Dual Output VGA to UXGA Distribution Amplifier with Audio
The Extron P/2 DA2 WM
Model Version Description Part #
 P/2 DA2 WM (gray) 60-296-01 Retired
 P/2 DA2 WM (black) 60-296-02 Retired
 P/2 DA2 WM (white) 60-296-03 Retired
 P/2 DA2 EC (white) 60-296-10 Retired
 P/2 DA2 WM AAP (gray) 60-311-01 Retired
 P/2 DA2 WM AAP (black) 60-311-02 Retired
 P/2 DA2 WM AAP (white) 60-311-03 Retired
 P/2 DA2 EC AAP (white) 60-311-10 Retired

This product has been retired.

SIMILAR PRODUCTS
  P/2 DA2xi Two Output VGA Distribution Amplifier

Specifications

Video
Gain Unity (0.7V), (0.8V) 15% peaking, (0.9V) 30% peaking
Bandwidth 300 MHz (-3dB), fully loaded
Video input
Number/signal type 1 VGA-UXGA: RGBHV, RGBS, RGsB, RsGsBs
Connectors (1) 15-pin HD female
Nominal level 0.7V p-p for RGB
Minimum/maximum levels Analog: 0.4V to 1.4V p-p with no offset
Impedance 75 ohms
Horizontal frequency 15 kHz to 135 kHz
Vertical frequency 30 Hz to 170 Hz
Return loss <-38dB @ 5 MHz
Maximum DC offset 200mV
Video output
Number/signal type 2 VGA-UXGA: RGBHV, RGBS, RGsB, RsGsBs
Connectors (2) 15-pin HD female: (1 display, 1 local monitor)
Nominal level 0.7V p-p for RGB at unity gain
Minimum/maximum levels 0.4V to 1.4V p-p
Impedance 75 ohms
Return loss <-40dB @ 5 MHz
DC offset ±5mV maximum
Sync
Input type RGBHV, RGBS, RGsB, RsGsBs
Output type RGBHV, RGBS, RGsB, RsGsBs
Input level 3.0V to 5.0V p-p
Output level TTL: 5.0V p-p, unterminated
Input impedance 510 ohms
Output impedance 40 ohms, typical
Max. propagation delay 18.8 ns
Max. rise/fall time 4 ns
Polarity Positive or negative (follows input)
Audio
Gain Unbalanced output: 0dB, balanced output: +6dB
Frequency response 20 Hz to 20 kHz, ±0.05dB
THD + Noise 0.03% @ 1 kHz at nominal level
S/N >90 kHz, balanced, at maximum outpute
Audio input
Number/signal type 1 stereo, unbalanced
Connectors (1) 3.5 mm female stereo jack, 2 channel; tip (L), ring (R), sleeve (GND)
Impedance >5 kohms unbalanced, DC coupled
Nominal level -10dBV (316mV)
Maximum level +8.5dBu (unbalanced) at 1% THD+N
Audio output
Number/signal type 1 stereo, balanced/unbalanced
Connectors (1) 3.5 mm captive screw connector, 5 pole
Impedance 50 ohms unbalanced, 100 ohms balanced
Maximum level (Hi-Z) >+15dBu, balanced or unbalanced at 1%THD+N
Maximum level (600 ohm) >+9dBu, balanced or unbalanced at 1%THD+N
General
Power 12 to 24VAC or VDC, 0.5A, 5 watts, external power supply
Temperature/humidity Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing
Rack mount No, but wall- or furniture-mountable
Enclosure type Metal
Enclosure dimensions
     P/2 DA2 WM F Plate: 4.5" H x 4.6" W x 0.1" D (11.4 cm H x 11.7 cm W x 0.3 cm D) (2 gang)
     P/2 DA2 WM F AAP Plate: 4.5" H x 8.3" W x 0.1" D (11.4 cm H x 21.1 cm W x 0.3 cm D) (4 gang)
     P/2 DA2 WM F EC Plate: 3.1" H x 4.0" W x 0.1" D (7.9 cm H x 10.2 cm W x 0.3 cm D) (Euro Channel)
     P/2 DA2 WM F EC AAP Plate: 3.1" H x 7.7" W x 0.1" D (7.9 cm H x 19.5 cm W x 0.3 cm D) (Euro Channel)
     All models Box: 2.6" H x 3.7" W x 1.6" D (6.6 cm H x 9.4 cm W x 4.1 cm D)
Product weight
     P/2 DA2 WM F 0.4 lbs (0.2 kg)
     P/2 DA2 WM F AAP 0.6 lbs (0.3 kg)
     P/2 DA2 WM F EC 0.3 lbs (0.1 kg)
     P/2 DA2 WM F EC AAP 0.7 lbs (0.3 kg)
Shipping weight (all models) 2 lbs (0.9 kg)
Vibration ISTA/NSTA 1A in carton (International Safe Transit Association)
Listings UL, CUL
Compliances CE, FCC Class A
MTBF 30,000 hours
Warranty 3 years parts and labor
(7.40-031303-D2)

Diagram

P/2 DA2 WM System Diagram

Panel Drawing

P/2 DA2 WM Panel Drawing