P/2 DA8/12 Series |
|
Video |
Gain | Unity |
Bandwidth | 350 MHz (-3 dB), fully loaded |
|
Video input |
Number/signal type | 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video |
Connectors | 1 female 15-pin HD (optional Mac/VGA adapters are available) |
Pin connections | ID bits on pins 4, 11, 12, and 15 are passed through to output 1. The pin 9 connection is passed through to output 1. |
Nominal level | 1.0 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p with no offset at unity gain |
Impedance | 75 ohms |
Horizontal frequency | 15 kHz to 135 kHz |
Vertical frequency | 30 Hz to 150 Hz |
Return loss | <-40 dB @ 5 MHz |
Input coupling | DC |
|
Video output |
Number/signal type | 8 or 12 (depending on model) VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (follows input type) |
Connectors | 8 or 12 female 15-pin HD |
Nominal level | 1.0 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
Minimum/maximum levels | 0.3 V to 1.5 Vp-p (follows input) |
Impedance | 75 ohms |
Return loss | <-40 dB @ 5 MHz |
DC offset | ±5 mV with input at 0 offset |
|
Sync |
Input type | RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level sync |
Output type | RGBHV, RGBS, RGsB, RsGsBs; bi-level and tri-level sync (follows input) Tri-level on Y, R-Y, B-Y channels (component video 720p, 1080i, 1080p) Bi-level on Y channel (for all other component video rates) |
Input level | 1.8 V to 5.0 Vp-p |
Output level | TTL: 5.0 Vp-p, unterminated |
Input impedance | 510 ohms |
Output impedance | 50 ohms |
Max. propagation delay | 60 ns |
Max. rise/fall time | 2 ns |
Polarity | Positive or negative (follows input) |
|
Audio — audio (A) models only |
Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
Frequency response | 10 Hz to 20 kHz, ±0.2 dB |
THD + Noise | 0.03% @ 1 kHz at nominal level |
S/N | >90 dB at maximum output (unweighted) |
Crosstalk | <-45 dB @ 1 kHz |
Stereo channel separation | >80 dB @ 1 kHz |
|
Audio input — audio (A) models only |
Number/signal type | 1 stereo, unbalanced |
Connectors | (1) 3.5 mm mini audio jack (tip, ring, sleeve) |
Impedance | >10 k ohms unbalanced, DC coupled |
Nominal level | -10 dBV (316 mVrms) |
Maximum level | +16 dBu, (unbalanced) at 1% THD+N |
NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
Audio output — audio (A) models only |
Number/signal type | 8 or 12 (depending on model) stereo, balanced/unbalanced |
Connectors | (8 or 12) 3.5 mm captive screw connectors, 5 pole |
Impedance | 50 ohms unbalanced, 100 ohms balanced |
Gain error | ±0.1 dB channel to channel |
Maximum level (Hi-Z) | >+28 dBu balanced, >+20 dBV unbalanced at 1% THD+N |
Maximum level (600 ohm) | >+21 dBm balanced, >+18 dBm unbalanced at 1% THD+N |
|
Control/remote — distribution amplifier |
Contact closure mute control | (2) 3.5 mm captive screw connectors, 4 pole, and (2) 3.5 mm captive screw connectors, 3 pole |
Contact closure pin configuration | |
8-output models | A = mute all outputs, 1 = mute output 1, 2 = mute output 2, 3 = mute output 3,... 8 = mute output 8 |
12-output models | A = mute all outputs, 1 = mute output 1, 2 = mute output 2, 3 = mute output 3,... 12 = mute output 12 |
|
General |
Power | 100 VAC to 240 VAC, 50-60 Hz, 30 watts, internal |
Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Cooling | Convection, no vents |
Mounting | |
Rack mount | Yes, with included brackets |
Furniture mount | Yes, with optional under-desk mounting kit |
Enclosure type | Metal |
Enclosure dimensions | 1.6" H x 17.4" W x 8.5" D (1U high, full rack wide) (4.1 cm H x 44.2 cm W x 21.6 cm D) (Depth excludes connectors.) |
Product weight | 6.0 lbs (2.7 kg) |
Shipping weight | 9 lbs (5 kg) |
Vibration | ISTA 1A in carton (International Safe Transit Association) |
Regulatory compliance |
Safety | CE, c-UL, UL |
EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
Product warranty | 3 years parts and labor |
Everlast power supply warranty | 7 years parts and labor |
NOTE | All nominal levels are at ±10%. |
|
NOTE | Specifications are subject to change without notice. |
|
(7.6-082709-D6) |