PowerCage MTP R AV Retired

MTP Twisted Pair Receiver for Composite or S-Video and Audio

Key Features

Receives composite video or S-video along with summed mono audio signals 1,000 feet (300 meters) or more over a single CATx cable
Compatible with NTSC, PAL, and SECAM
Modular, hot-swappable board designed for the PowerCage 1600 enclosure, part # 60-978-01
Sharpness and gain controls for optimizing signal and image quality
Compatible with PowerCage MTP T AV, MTP Series video transmitters, and MTP Series switchers, matrix switchers, and distribution amplifiers

Model	Version Description	Part #
PowerCage MTP R AV	Receiver	70-816-01	Retired

This product has been retired.

The Extron PowerCage MTP R AV is a modular board-designed MTP Twisted Pair receiver for the PowerCage^® 1600 enclosure. It receives composite video or S-video along with summed mono audio signals, sent over a single CATx cable from an MTP Series transmitter. The PowerCage MTP R AV outputs either composite video or S-video and dual mono audio signals. It can be used with any CAT 5, CAT 5e, or CAT 6 cable or with Extron Enhanced Skew-Free™ AV UTP cable for cable runs of 1,000 feet (300 meters) or more.

The single-slot board design of the PowerCage MTP R AV allows for as many as 16 receivers to be populated in the PowerCage 1600 enclosure, reducing installation time and simplifying power management. The PowerCage MTP R AV receiver is hot-swappable, allowing for replacing or upgrading boards in the field at any time, without having to power down the system.

The MTP Series

The PowerCage MTP T AV is fully compatible with MTP Series twisted pair products, designed for easy integration into new and existing AV environments. The MTP Series is a complete twisted pair system including transmitters, receivers, switchers, matrix switchers, and distribution amplifiers, providing the ability to send, route, and distribute video, audio, and control signals. The entire family of Extron MTP Series products sets the price/performance standard for audio/video twisted pair technology.

Benefits of Using Twisted Pair

Because the MTP Series utilizes CATx cable for distribution, it offers considerable advantages in cost, performance, and ease of installation. CATx cable is a fraction of the size of coaxial cable, and much lighter, more flexible, and less expensive, thus providing AV system designers and installers with an economical, space efficient solution for a variety of applications.

Features

Input: Female RJ-45 connector

Outputs: Two Female BNC connectors for video, 3.5 mm captive screw connector for audio

Receives composite video or S-video along with summed mono audio signals 1,000 feet (300 meters) or more over a single CATx cable

Compatible with NTSC, PAL, and SECAM

Modular, hot-swappable board designed for the PowerCage 1600 enclosure, part # 60-978-01 — Additional boards may be added at any time for quick and easy upgradeability or expansion. Hot-swappable components allow the user to replace boards at any time without the need to power down the system. This is especially useful for mission-critical applications that require continuous system operation.

Space-saving design in a compact 3U, rack-mountable enclosure — The compact design of the PowerCage 1600 enclosure accommodates up to 16 single-slot or 8 double-slot boards. The PowerCage 1600 eliminates individual power supplies for each transmitter and receiver, and provides forced-air cooling for each module.

Sharpness and gain controls for optimizing signal and image quality

LED power indicator

Compatible with PowerCage MTP T AV, MTP Series video transmitters, and MTP Series switchers, matrix switchers, and distribution amplifiers

COMPATIBLE TRANSMITTERS
	MTP T AV & MTP T AV RCA	MTP Twisted Pair Composite Video and Audio Transmitters

COMPATIBLE TRANSMITTERS

MTP T AV & MTP T AV RCA

MTP Twisted Pair Composite Video and Audio Transmitters

SIMILAR PRODUCTS
	MTP R AV & MTP R AV RCA	MTP Twisted Pair Composite Video and Audio Receivers
	MTP RL 15HD A & MTP RL 15HD A SEQ	MTP Twisted Pair Receivers for VGA and Audio
	MTP T 15HD A	MTP Twisted Pair Transmitter for VGA and Audio with EDID Minder®
	MTP T AV & MTP T AV RCA	MTP Twisted Pair Composite Video and Audio Transmitters

SIMILAR PRODUCTS

MTP R AV & MTP R AV RCA

MTP Twisted Pair Composite Video and Audio Receivers

MTP RL 15HD A & MTP RL 15HD A SEQ

MTP Twisted Pair Receivers for VGA and Audio

MTP T 15HD A

MTP Twisted Pair Transmitter for VGA and Audio with EDID Minder®

MTP T AV & MTP T AV RCA

MTP Twisted Pair Composite Video and Audio Transmitters

Specifications

PowerCage™ 1600 with PowerCage MTP Boards

Video — PowerCage MTP T 15HD RSA, PowerCage MTP R 15HD RSA SEQ

Gain

Unity

Number/signal type

1 set of proprietary analog signals

Connector

1 female RJ-45

Video input — PowerCage MTP T 15HD RSA

Number/signal type

1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (YUVi or YUVp/HDTV), S-video, or composite video

Connector

1 female 15-pin HD

Nominal levels

1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video

Minimum/maximum levels

0.3 V to 1.45 Vp-p

Impedance

75 ohms

Horizontal frequency

15 kHz to 130 kHz

Vertical frequency

30 Hz to 150 Hz

Return loss

>30 dB @ 5 MHz

DC offset (max. allowable)

250 mV

Video output — PowerCage MTP R 15HD RSA SEQ

Number/signal type

1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, component video (YUVi or YUVp/HDTV), S-video, or composite video

Connector

1 female 15-pin HD

Nominal levels

1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video

Minimum/maximum levels

0.3 V to 1.45 Vp-p

Impedance

75 ohms

Return loss

>30 dB @ 5 MHz

DC offset

<±0.35 mV with input at 0 offset

Skew compensation

62 ns

Maximum resolution

Up to 1920x1200 or 2048x1080 or 1080p at 300'
Up to 1024x768 at 600'

NOTE	See the user guide for the maximum distances recommended for specific resolutions.

Sync — PowerCage MTP T 15HD RSA, PowerCage MTP R 15HD RSA SEQ

Input/output type

RGBHV, RGBS, RGsB, RsGsBs

Standards

NTSC 3.58, NTSC 4.43, PAL, SECAM

Input level (transmitter)

3.5 V to 5.5 Vp-p, unterminated

Output level (receiver)

4.0 V to 5.0 Vp-p, unterminated

Input impedance (transmitter)

573 ohms ±5%

Output impedance (receiver)

110 ohms

Polarity

Transmitter

Positive or negative (follows input polarity)

Receiver

Positive or negative (switch-selectable)

Video — PowerCage MTP T AV, PowerCage MTP R AV

Gain

Unity

Differential phase error

<1.0° at 3.58 MHz and 4.43 MHz

Differential gain error

<1.0% at 3.58 MHz and 4.43 MHz

Video input — PowerCage MTP T AV

Number/signal type

1 S-video or composite video

Connectors

2 female BNC

Nominal level

1 Vp-p for Y of S-video and for composite video
0.3 Vp-p for C of S-video

Minimum/maximum levels

0.3 V to 1.5 Vp-p with no offset

Impedance

75 ohms

Return loss

>30 dB, DC @ 10 MHz

DC offset (max. allowable)

250 mV

Video output — PowerCage MTP R AV

Number/signal type

1 S-video or composite video

Connectors

2 female BNC

Nominal level

1 V p-p for Y of S-video and for composite video
0.3 V p-p for C of S-video

Minimum/maximum levels

0.3 V to 1.5 Vp-p

Impedance

75 ohms

Return loss

>35 dB @ 5 MHz

DC offset

±20 mV with input at 0 offset

Sync — PowerCage MTP T AV, PowerCage MTP R AV

Standards

NTSC 3.58, NTSC 4.43, PAL, SECAM

Audio — PowerCage MTP T 15HD RSA, PowerCage MTP R 15HD RSA SEQ, PowerCage MTP T AV, PowerCage MTP R AV

Number/signal type

1 set of proprietary analog signals

Connector

1 female RJ-45

Gain

Unbalanced output: 0 dB; balanced output: +6 dB

Frequency response

20 Hz to 20 kHz, ±1 dB

THD + Noise

0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level

S/N

>70 dB at maximum output (unweighted)

Stereo channel separation

>60 dB @ 1 kHz

CMRR

>43 dB @ 20 Hz to 20 kHz

Audio input — PowerCage MTP T 15HD RSA, PowerCage MTP T AV

Number/signal type

PowerCage MTP T 15HD RSA

1 stereo, unbalanced

PowerCage MTP T AV

1 stereo, balanced/unbalanced

Connector

(1) 3.5 mm captive screw connector, 5 pole

Impedance

PowerCage MTP T 15HD RSA

>10k ohms, unbalanced

PowerCage MTP T AV

>10k ohms, unbalanced; >20k ohms, balanced; AC coupled

Nominal levels

+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)

Maximum level

+18 dBu, (unbalanced) at 1% THD+N

NOTE	0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output — PowerCage MTP R 15HD RSA SEQ, PowerCage MTP R AV

Number/signal type

PowerCage MTP R 15HD RSA SEQ

1 mono, balanced/unbalanced

PowerCage MTP R AV

2 mono, balanced/unbalanced

Connector

(1) 3.5 mm captive screw connector, 5 pole

Impedance

50 ohms unbalanced, 100 ohms balanced

Gain error

±1 dB channel to channel

Nominal levels

+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)

Maximum level

+18 dBu, unbalanced at 1% THD+N

Control/remote

NOTE	PowerCage MTP AV Series boards do not have any RS-232 communication. PowerCage MTP 15HD Series boards have only pass-through RS-232 communication.

Serial control ports

Enclosure

1 bidirectional RS-232, 2.5 mm mini stereo jack (front panel)

PowerCage MTP 15HD boards

External device, pass-through, uni- or bidirectional
Input/output: 1 set of proprietary signals on a female RJ-45 jack
Output/input: 1 RS-232 via 3 poles of a 3.5 mm captive screw connector (3 pole for transmitter, 5 pole for receiver)

Baud rate and protocol

PowerCage MTP 15HD boards

Baud rates

Up to 38400 bps at up to 600' (182.9 m)
(Higher data rates and distances are possible. Performance varies based on baud rate and cable length.)

Protocol

Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
Defaults: 8 data bits, 1 stop bit, no parity

NOTE	For PowerCage MTP 15HD boards, protocol is mirrored between the transmitter and the receiver.

Serial control pin configurations

Captive screw connector

PowerCage MTP 15HD boards

Transmitter: 1 = Tx, 2 = Rx, 3 = GND
Receiver: 3 = GND, 4 = Tx, 5 = Rx

Mini stereo jack

RS-232: tip = Tx, ring = Rx, sleeve = GND

General

Recommended cable type

Extron Enhanced Skew-Free^™ AV UTP cable or CAT 5/5e/6 (shielded or unshielded)

Power supply

Internal, 1 or 2* (positive-negative), primary and redundant, hot-swappable
100-240 VAC, 50-60 Hz
*A redundant power supply is optional.

Power consumption

System

Enclosure without boards: 12.4 watts

Individual MTP boards

MTP T 15HD RSA: 4.30 watts
MTP R 15HD RSA SEQ: 8.38 watts
MTP T AV: 2.69 watts
MTP R AV: 3.92 watts

Power input requirements for boards

12 VDC, 1.0 A, supplied by the PowerCage enclosure

Ambient temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling

Enclosure: fans, front to back
Boards: convection, within the PowerCage enclosure

Thermal dissipation

27.6 BTU/hr

Mounting — PowerCage enclosure

Rack mount

Yes

Enclosure type

Metal

Enclosure dimensions

PowerCage enclosure

5.25" H x 17.0" W x 12.25" D (3U high, full rack wide)
13.3 cm H x 43.2 cm W x 31.2 cm D
(Depth excludes connectors on the optional boards. Width excludes rack ears.)

PowerCage MTP R 15HD RSA SEQ

Fits a double slot opening in a PowerCage enclosure.

All other boards

Fits a single slot opening in a PowerCage enclosure.

Product weight

PowerCage enclosure

11.6 lbs (5.3 kg)

PowerCage MTP R 15HD RSA SEQ

1.0 lbs (0.5 kg)

All other boards

0.8 lbs (0.4 kg)

Shipping weight

PowerCage enclosure

13 lbs (6 kg)

Boards

2 lbs (1 kg) each

Vibration

ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

Safety

CE, c-UL, UL

EMI/EMC

CE, C-tick, FCC Class A, ICES, VCCI

Environmental

Complies with the appropriate requirements of RoHS, WEEE.

Product warranty

3 years parts and labor

NOTE	All nominal levels are at ±10%.

NOTE	Specifications are subject to change without notice.

(8.0-051412-D7)

PowerCage MTP R AV Retired

The MTP Series

Benefits of Using Twisted Pair

Features

Specifications

Diagram

Panel Drawing