PI 140 Retired

High Power Injector
Key Features
  • Supplies power to a single large TouchLink Pro touchpanel, ShareLink Pro Series, select NAV and XTP Systems products
  • Designed specifically for the high data rates of XTP Systems
  • Provides up to 44 W of power to larger TouchLink Pro touchpanels
  • No impact on signal or communication
  • Patented ZipClip™ 300 mounting kit included:
    - Mounts securely on a variety of surfaces, including rack rails, tables, lecterns, projector poles, and table legs
    - Wire tie slots for proper strain relief and dressing of excess cable
    - Quick release tab allows for easy installation and removal
  • Real-time status LEDs for troubleshooting and monitoring
The Extron PI 140
Model Version Description Part #
 PI 140 Single Port High Power Injector 60-1361-01 Retired

This product has been retired.
Suggested Replacement
PI 130

The Extron PI 140 is a single port high-power injector that provides power and communications to larger TouchLink Pro touchpanels, ShareLink Pro 1000, and NAV systems over a single Ethernet cable, eliminating the need for a local power supply. Designed specifically for larger TouchLink Pro touchpanels, this injector will provide up to 44 W of power. Signal quality and communication is unaffected when using the power injector, as it supports high data rates. It can be installed anywhere within the signal path, providing design flexibility for these touchpanels. The unique enclosure of the power injector enables it to be installed in small spaces and the included Extron ZipClip™ 300 mounting kit provides ease of installation.

The unique 1U, quarter rack width enclosure features threaded inserts and recessed grooves for zip ties, allowing for easy mounting onto Extron rack shelves or oddly shaped supports, such as projector poles and rack rails. In addition, the patented Extron ZipClip 300 mounting kit offers further versatility to quickly and securely mount the PI 140 within lecterns, beneath tables, or into many other tight spaces.

Features

  • Supplies power to a single large TouchLink Pro touchpanel, ShareLink Pro Series, select NAV and XTP Systems products — The PI 140 provides power for 12”, 15”, and 17” TouchLink Pro models, all ShareLink Pro models, 1G NAV Copper Encoder/Decoders, and the XTP T USW 103 4K, 60-1717-12 transmitter, eliminating the need for a local power supply.
  • Designed specifically for the high data rates of XTP Systems
  • Provides up to 44 W of power to larger TouchLink Pro touchpanels
  • No impact on signal or communication
  • Patented ZipClip™ 300 mounting kit included:
    - Mounts securely on a variety of surfaces, including rack rails, tables, lecterns, projector poles, and table legs
    - Wire tie slots for proper strain relief and dressing of excess cable
    - Quick release tab allows for easy installation and removal
  • Real-time status LEDs for troubleshooting and monitoring — Front and rear indicators provide status of power being supplied to the TouchLink Pro touchpanel.
  • UL/c-UL listed and CE compliant
  • 1U, quarter rack width enclosure
  • Extron Everlast™ power supply — Provides worldwide power compatibility, with high-demonstrated reliability and low power consumption for reduced operating cost
  • Extron Everlast Power Supply is covered by a 7‑year parts and labor warranty
SIMILAR PRODUCTS
  PI 115 Power Injector for XTP and Pro Series Control Systems
  XTP PI 400 Four Port Power Injector for XTP and Pro Series Control Systems

Specifications

PI 140
General
   Connectors 1 RJ-45 female connector for pass-through input
1 RJ-45 female connector for power and pass-through output
   Data rate 10/100/1000Base-T, half/full duplex with auto detect
   Power output 56 VDC, 0.80 A, 44.8 watts
   Power input 100 VAC to 240 VAC, 50-60 Hz
   Ambient temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
   Cooling Convection, no vents
   Mounting 
      Rack mount Yes, with optional 1U rack shelf with the included ZipClip 300 mounting clip or by securing to rack rails with tie wraps
      Furniture mount Yes, with the included ZipClip 300 mounting clip
      Pole mount Yes, using tie wraps
   Enclosure type  High impact, high temperature plastic
   Enclosure dimensions 1.7" H x 4.3" W x 6.5" D (1U high, quarter rack wide)
(4.2 cm H x 11.0 cm W x 16.5 cm D)
   Product weight  1.1 lb (0.5 kg)
   Shipping weight  2 lbs (1 kg)
   Vibration  Operating: 10-250 Hz, 0.25 Gp-p, 3 axes, 15 min. sweep
   Regulatory compliance 
      Safety, EMI/EMC CE, C-tick, c-UL, UL, CISPR 22 Class B, CISPR 24, FCC Class B, NEC Class 2
      Environmental Complies with the appropriate requirements of RoHS, WEEE.
   Product warranty 3 years parts and labor
   Everlast power supply warranty 7 years parts and labor
    NOTE     Specifications are subject to change without notice.
(8.1-072115-D1)

Diagram

PI 140 Diagram

Panel Drawing

PI 140 Panel Drawing