RGB 203 Rxi |
|
Video |
Routing | 3 x 1 router |
Gain | 0.5 V to 1.45 Vp-p |
Bandwidth | 300 MHz (-3 dB) |
Rise time | 1.5 ns |
|
Video input |
Number/signal type | 3 analog VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs |
Connectors | 3 female 15-pin HD |
Nominal level | 0.7 Vp-p for RGB |
Minimum/maximum levels | Analog: 0.3 V to 1.45 Vp-p with no offset at unity gain |
Impedance | 75 ohms |
Horizontal frequency | 15 kHz to 150 kHz |
Vertical frequency | 40 Hz to 140 Hz |
Return loss | <-30 dB @ 5 MHz |
DC offset (max. allowable) | 4 V |
|
Video output |
Number/signal type | 1 analog RGBHV, RGBS, RGsB |
Connectors | 6 female BNC |
Nominal level | 0.7 Vp-p for RGB |
Minimum/maximum levels | 0.3 V to 1.30 Vp-p |
Impedance | 75 ohms |
Return loss | -30 dB @ 5 MHz |
DC offset | ±5 mV maximum with input at 0 offset |
|
Sync |
Input type | RGBHV, RGBS, RGsB, RsGsBs |
Output type | RGBHV, RGBS, RGsB |
Input level | 2 V to 5.5 Vp-p with ±0.2 VDC offset max. |
Output level | TTL: 4V to 5V p-p, unterminated |
Input impedance | 510 ohms |
Output impedance | 75 ohms |
Max. propagation delay | 85 ns |
Max. rise/fall time | 2 ns |
Polarity | RGBHV: tracks polarity (or force negative sync via internal jumper) RGBS, RGsB: negative |
|
Audio |
Routing | 2 x 1 stereo router |
Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
THD + Noise | 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
S/N | >90 dB at rated maximum output (17 dBu), balanced (unweighted) |
Crosstalk | <-90 dB @ 1 kHz, fully loaded |
Stereo channel separation | >90 dB @ 1 kHz |
|
Audio input |
Number/signal type | 2 PC level stereo, unbalanced |
Connectors | (2) 3.5 mm mini audio jacks (female) |
Impedance | >10k ohms, unbalanced, DC coupled |
Nominal level | -10 dBV (316 mVrms) |
Maximum level | +8.5 dBu, (balanced or unbalanced) at 1% THD+N |
NOTE | 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
Audio output |
Number/signal type | 1 buffered stereo (2 channel) or mono, balanced/unbalanced |
Connectors | (1) 3.5 mm captive screw connector, 5 pole |
Impedance | 50 ohms unbalanced, 100 ohms balanced |
Gain error | ±0.1 dB channel to channel |
Maximum level (Hi-Z) | >+14 dBu, balanced at 1% THD+N |
Maximum level (600 ohm) | >+8.5 dBm, balanced at stated %THD+N |
|
Control/remote — interface |
Serial control port | RS-232, female 9-pin D connector (also used for contact closure) |
Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity |
Serial control pin configuration | 2 = TX, 3 = RX, 5 = GND |
Contact closure | 1 female 9-pin D connector (also used for RS-232) |
Contact closure pin configuration | 1 = input #1, 4 = input #2, 5 = GND |
Program control | Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™) |
|
General |
Input power | 100 VAC to 240 VAC, 50-60 Hz, 18 watts, internal |
MBC power jacks | 9.0 VDC, 0.15 A |
Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +113 °F (0 to +45 °C) / 10% to 90%, noncondensing |
Cooling | Convection, vents on left and right sides |
Mounting | |
Rack mount | Yes, with optional 1U rack shelf |
Furniture mount | Yes, with optional under-desk mounting kit or through-desk mounting kit |
Enclosure type | Metal |
Enclosure dimensions | 1.75" H x 8.75" W x 8.0" D (1U high, half rack wide) (4.4 cm H x 22.2 cm W x 20.3 cm D; with rear BNCs, D = 8.4" [21.3 cm]) (Depth excludes knobs.) |
Product weight | 2.2 lbs (1.0 kg) |
Shipping weight | 5 lbs (3 kg) |
Vibration | ISTA 1A in carton (International Safe Transit Association) |
Regulatory compliance |
Safety | CE, c-UL, UL |
EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI |
Product warranty | 3 years parts and labor |
NOTE | All nominal levels are at ±10%. |
|
NOTE | Specifications are subject to change without notice. |
|
(7.6-101909-D8) |