| Video |
| Gain |
Unity (0.70V p-p),: (0.725V p-p) 50% peaking, (0.75V p-p) 100% peaking |
| Bandwidth |
300 MHz (-3dB) |
| Video input |
| Number/signal type |
1: analog RGBHV, RGBS, RGsB, RsGsBs |
| Connectors |
|
| RGB 500, RGB 500 Dual, RGB 508 |
1: 9-pin D male, MBC/LBC cable or buffer |
| RGB 560, RGB 560 Dual, RGB 568, RGB 560 AKM |
1: 15-pin HD female |
| Minimum/maximum levels |
Analog: 0.3V to 1.5V p-p with no offset |
| Impedance |
75 ohms or High Z, switchable (set to 75 ohms if no local monitor is connected) |
| Horizontal frequency |
Autoscan 15 kHz to 130 kHz |
| Vertical frequency |
Autoscan 30 Hz to 120 Hz |
| Return loss |
-30dB @ 5 MHz |
| Maximum DC offset |
4.0V |
| Video output |
| Number/signal type |
1: analog RGBHV, RGBS, RGsB |
| Connectors |
|
| All models |
5 BNC female |
| RGB 560, RGB 560 Dual, RGB 568, RGB 560 AKM |
1: 15-pin HD female for buffered local monitor output |
| Minimum/maximum levels |
0.70V to 0.75V p-p with no offset and 0.7V p-p input |
| Impedance |
75 ohms |
| Return loss |
-30dB @ 5 MHz |
| Sync |
| Input type |
RGBHV TTL (±), RGBS TTL (-), RGsB 0.3V (-), RsGsBs 1.3V (-) |
| Output type |
RGBHV (±), RGBS(-), RGsB (-) |
| Input level |
2V to 5.5V p-p with ±0.3VDC offset (max.) |
| Output level |
4V to 5V p-p |
| Input impedance |
10 kohms |
| Output impedance |
75 ohms |
| Max. input voltage |
5.7V p-p |
| Max. propagation delay |
48 nS |
| Max. rise/fall time |
3.5 nS |
| Polarity |
|
| RGB 560 AKM |
RGBHV: Polarity follows input when RGBHV is input and the |
|
sync polarity switch is set to Off. Sync polarity is negative if |
|
the sync polarity switch is set to On. |
| RGBS, RGsB |
Negative |
| All other models |
RGBHV: Polarity follows input when RGBHV is input and the |
|
bottom panel sync polarity jumper is set to follow (pin 1 jumpered |
|
to pin 2). Sync polarity is negative if the sync polarity jumper |
|
is set to negative (pin 2 jumpered to pin 3). |
| RGBS, RGsB |
Negative |
| Audio |
| Gain |
Unbalanced 0dB, balanced +6dB |
| Frequency response |
20 Hz to 20 kHz, ±0.05dB |
| THD + Noise |
0.03% @1 kHz,: 0.3% @ 20 kHz at rated maximum output drive |
| S/N |
>90dB at rated maximum output (14dBm), balanced |
| Stereo channel separation |
>95dB @ 1 kHz to 20 kHz |
| Audio input |
| Number/signal type |
1 PC level stereo, unbalanced |
| Connectors |
1: 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground) |
| Impedance |
10 kohms, DC coupled |
| Maximum level |
+8.5dBu,: (unbalanced) at stated %THD+N |
| Audio output |
| Number/signal type |
1 stereo (2 channel), balanced/unbalanced |
| Connectors |
1: 3.5 mm captive screw connector, 5 pole |
| Impedance |
50 ohms unbalanced,: 100 ohms balanced |
| Gain error |
±0.1dB channel to channel |
| Maximum level (600 ohm) |
>+14dBm, balanced at stated %THD+N |
| General |
| Power |
100VAC to 240VAC, 50/60 Hz, 5 watts, external, auto-switchable; |
|
to 12 to 24VAC or VDC, 0.20 A power supply.: Product requires 0.20 A (minimum). |
|
(Order the power supply separately, part #70-055-01.) |
| Temperature/humidity |
Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing |
|
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing |
| Rack mount |
No |
| Furniture mount |
Yes, or wall mount, with included hardware |
| Enclosure type |
Metal |
| Enclosure dimensions — RGB 500, RGB 560 |
|
| Faceplate |
4.5" H x 4.6" W x 0.1" D: (2-gang) |
|
(11.4 cm H x 11.7 cm W x 0.3 cm D) |
| Interface enclosure |
2.5" H x 3.7" W x 1.75" D |
|
(6.4 cm H x 9.4 cm W x 4.4 cm D) |
|
(Depth excludes connectors and knobs.) |
| Enclosure dimensions — RGB 500 Dual, RGB 508, RGB 560 Dual, RGB 568 |
|
| Faceplate |
4.5" H x 8.3" W x 0.1" D: (4-gang) |
|
(11.4 cm H x 21.1 cm W x 0.3 cm D) |
| Interface enclosure |
2.5" H x 3.7" W x 1.75" D |
|
(6.4 cm H x 9.4 cm W x 4.4 cm D) |
|
(Depth excludes connectors and knobs.) |
| Enclosure dimensions — RGB 560 AKM |
|
| Interface |
3.0" H x 8.2" W x 1.5" D |
|
(7.62 cm H x 20.8 cm W x 3.8 cm D) |
|
(Depth excludes connectors and knobs.) |
| Product weight |
|
| RGB 500, RGB 508, RGB 560 |
0.7 lbs (0.3 kg) |
| RGB 568, RGB 560 AKM |
0.9 lbs (0.4 kg) |
| Shipping weight |
RGB 500, RGB 560: 2 lbs (0.9 kg) |
|
All other models: 3 lbs (1.4 kg) |
| Vibration |
ISTA/NSTA 1A in carton (International Safe Transit Association) |
| Listings |
UL |
| Compliances |
RGB 560 AKM: CE |
|
All other models: CE, FCC Class A |
| MTBF |
30,000 hours |
| Warranty |
3 years parts and labor |