| Video input |
|---|
| Number/signal type | 1 analog RGBHV, RGBS, RGsB, RsGsBs |
| Connectors — RGB 500, RGB 500 Dual, RGB 500 EC, RGB 508, RGB 508 EC, RGB 500 AKM |
|---|
| 1: 9-pin D male, MBC/LBC cable or buffer |
| Connectors — RGB 550, RGB 550 Dual, RGB 550 EC, RGB 558, RGB 558 EC, RGB 550 AKM |
|---|
| 1: 15-pin HD male (Mac and Sun/SGI to VGA adapter cables are available.) |
| Nominal level(s) | Analog: 0.3V to 1.5V p-p |
| Minimum/maximum level(s) | Analog: 0V to 1.5V p-p |
| Impedance | 75 ohms or High Z, switchable (set to 75 ohms if no local monitor is connected) |
| Horizontal frequency | Autoscan 15 kHz to 130 kHz |
| Vertical frequency | Autoscan 30 Hz to 120 Hz |
| Return loss | -30dB @ 5 MHz |
| Maximum DC offset | 4.0V |
| Video throughput |
|---|
| Gain AKMmodels (0.7V) unity, (0.8V) 50%, (0.9V) 100% |
|---|
| All other models Unity (0.70V p-p), (0.725V p-p) 50% peaking, |
|---|
| (0.75V p-p) 100% peaking |
| Bandwidth | 300 MHz (-3dB) |
| Video output |
|---|
| Number/signal type | 1 analog RGBHV, RGBS, RGsB |
| Connectors — All models 5 BNC female |
|---|
| Connectors — RGB 550, RGB 550 Dual, RGB 550 EC, RGB 558, RGB 558 EC, RGB 550 AKM |
|---|
| 1: 15-pin HD female for buffered local monitor output |
| Nominal level AKM models 0.7V p-p, 0.8V p-p, 0.9V p-p |
|---|
| All other models 0.70V p-p, 0.725V p-p, 0.75V p-p |
|---|
| Impedance | 75 ohms |
| Return loss | -30dB @ 5 MHz |
| Sync |
|---|
| Input type | RGBHV TTL (±), RGBS TTL (±), RGsB 0.3V (-), RsGsBs 1.3V (-) |
| Output type | RGBHV (±), RGBS(±), RGsB (-) |
| Input level | 2V to 5.5V p-p with ±0.3VDC offset (max.) |
| Output level | 4V to 5V p-p |
| Input impedance | 10 kohms |
| Output impedance | 75 ohms |
| Max. input voltage | 5.7V p-p |
| Max. propagation delay | 48 nS |
| Max. rise/fall time | 3.5 nS |
| Polarity — AKM models RGBHV Polarity follows input when RGBHV is input and the |
|---|
| sync polarity switch is set to Off.: Sync polarity is negative if |
| the sync polarity switch is set to On. |
| RGBS, RGsB | Negative |
| Polarity — All other models |
|---|
| RGBHV: Polarity follows input when RGBHV is input and the bottom |
| panel sync polarity jumper is set to follow (pin 1 jumpered to pin 2). |
| Sync polarity is negative if the sync polarity jumper is set |
| to negative (pin 2 jumpered to pin 3). |
| RGBS, RGsB | Negative |
| Audio input |
|---|
| Number/signal type | 1 PC level stereo, unbalanced |
| Connectors | 1: 3.5 mm stereo jack, 2 channel; tip (L), ring (R), sleeve (ground) |
| Impedance | 10 kohms, DC coupled |
| |
|---|
| Minimum level: 100mV |
| Maximum level | +8.5dBu,: (unbalanced) @ stated %THD+N |
| Audio throughput |
|---|
| Gain | Unbalanced 0dB,: balanced +6dB |
| Frequency response | ±0.05dB @ 20 Hz to 20 kHz |
| THD + Noise | 0.03% @1 kHz,: 0.3% @ 20 kHz at rated maximum output drive |
| S/N | >90dB, output 14dBu, balanced |
| Stereo channel separation | >95dB @ 1 kHz to 20 kHz |
| Audio output |
|---|
| Number/signal type | 1 stereo (2 channel), balanced/unbalanced |
| Connectors | 3.5 mm stereo captive screw terminal, 5 pole, for left and right output |
| Impedance | 50 ohms unbalanced,: 100 ohms balanced |
| Gain error | ±0.1dB channel to channel |
| Drive (600 ohm) | > +14dBu, balanced at stated %THD+N |
| General |
|---|
| Power | 12 to 24VAC or VDC, 0.5 A, 5 watts, external |
| (Order the power supply separately, part #70-055-01.) |
| Temperature/humidity | Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing |
| Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing |
| Rack mount | No |
| Furniture mount | Yes, or wall mount, with included hardware |
| Enclosure type | Metal |
| Enclosure dimensions — RGB 500, RGB 550 |
|---|
| Faceplate | 4.50" H x 4.50" W |
| (11.43 cm H x 11.43 cm W): (2-gang) |
| Interface enclosure | 2.50" H x 3.70" W x 1.75" D |
| (6.35 cm H x 9.40 cm W x 4.45 cm D) |
| Enclosure dimensions — RGB 500 Dual, RGB 508, RGB 550 Dual, RGB 558 |
|---|
| Faceplate | 4.50" H x 8.20" W |
| (11.43 cm H x 20.83 cm W): (4-gang) |
| Interface enclosure | 2.50" H x 3.70" W x 1.75" D |
| (6.35 cm H x 9.40 cm W x 4.45 cm D) |
| Enclosure dimensions — RGB 500 EC, RGB 550 EC |
|---|
| Faceplate | 3.15" H x 3.93" W: (8.00 cm H x 9.98 cm W) |
| Interface enclosure | 2.50" H x 3.70" W x 1.75" D |
| (6.35 cm H x 9.40 cm W x 4.45 cm D) |
| Enclosure dimensions — RGB 508 EC, RGB 558 EC |
|---|
| Faceplate | 3.15" H x 7.69" W: (8.00 cm H x 19.53 cm W) |
| Interface enclosure | 2.50" H x 3.70" W x 1.75" D |
| (6.35 cm H x 9.40 cm W x 4.45 cm D) |
| Enclosure dimensions — RGB 500 AKM, RGB 550 AKM |
|---|
| Interface | 3.08" H x 8.13" W x 1.62" D |
| (7.82 cm H x 20.64 cm W x 4.12 cm D) |
| Shipping weight | RGB 500, RGB 550: 2 lbs (0.9 kg) |
| All other models: 3 lbs (1.4 kg) |
| Vibration | NSTA 1A in carton (National Safe Transit Association) |
| Approvals AKM models UL, CE |
|---|
| All other models UL, CE, FCC Class A |
|---|
| MTBF | 30,000 hours |
| Warranty | 3 years parts and labor |
| (7.0-030100-D1) | |