SCP 150 Retired

System 5 IP Secondary Control Panel
Key Features
  • Optional control panel for use with the System 5 IP system switcher
  • Controls the volume, switching, projector, and room functions of the System 5 IP
  • Tri-color, backlit buttons can be custom-labeled
  • IR controllable with optional IR 402 remote
The Extron SCP 150
Model Version Description Part #
 SCP 150 Controller Only 60-495-00 Retired
 SCP 150 Gray 60-495-01 Retired
 SCP 150 Black 60-495-02 Retired
 SCP 150 White 60-495-03 Retired
 SCP 150 RAL9010 white 60-495-05 Retired

This product has been retired.

Features

  • Optional control panel for use with the System 5 IP system switcher
  • Controls the volume, switching, projector, and room functions of the System 5 IP
  • Fits into a two-gang box and can be surface-mounted in a podium, table, or wall
  • Tri-color, backlit buttons can be custom-labeled
  • IR controllable with optional IR 402 remote
  • Ships with an assortment of pre-printed button labels
  • Optional mounting brackets/mud rings available
  • Available in black, white, and RAL9010 white
SIMILAR PRODUCTS
  Backlit Button Labels Labels for Backlit Buttons
  Cable Clamp / Pass-Through for Extron RGB 198 and SW2 VGA DA2 AF R
  CCB 30 Three-Button Contact Closure Remote for Cable Cubby and AVEdge Enclosures
  CCR 2BLB Two-Button Contact Closure Remote With Customizable Backlit Buttons
  CCR 30 Contact Closure Remote with Three LED Switches
  CCR 4BLB Four-Button Contact Closure Remote With Customizable Backlit Buttons
  CFG Cable 9-pin D Female to 2.5 mm TRS Configuration Cable
  CTR 8 Eight Input Contact Closure to RS-232 Converter
  IR Emitter and Shield Kits IR Emitter Kits for Extron Products With IR Output
  IR Sensor Remote IR Receiver for Use with SMD 101 and SMD 202
  RSB 123 Basic Rack Shelf for 3.5" Deep Products
  SM Series Show Me Cable for TeamWork Collaboration Systems
  UCM R308 Universal Controller Mounting Panel with 8 AV Connectivity Module Openings
  UCM RAAP Universal Controller Mounting Rack Kit
  USB CFG Cable USB A Male to USB Mini B Male Configuration Cable

Specifications

SCP 150, SCP 150 AAP
Control/remote — control pad
  Serial control port  RS-232, via a 3.5 mm captive screw connector, 3 pole
  Baud rate and protocol  9600 baud, 8 data bits, 1 stop bit, no parity
  Serial control pin configurations  A = TX, B = RX, C = GND
  IR remote control  IR 402 (optional)
30' maximum, 40 degrees off axis
  Program control  Extron's Simple Instruction Set (SIS™)
General
  Power  12 VDC, at 0.5 A, from the System 5 IP switcher
  Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
  Rack mount  No, but furniture/wall mountable with included faceplates and electrical boxes or optional mounting bracket kits or AAP wall plates.
  Enclosure type  Metal
  Enclosure dimensions  
        SCP 150  
            Plate  4.5" H x 4.6" W x 0.1" D (2 gang)
11.4 cm H x 11.7 cm W x 0.3 cm D
            Board  2.9" H x 3.5" W x 0.5" D
7.4 cm H x 8.9 cm W x 1.3 cm D
[Allow at least 1.5" (3.8 cm) depth in the wall or furniture. Depth excludes connectors, knob, and buttons.]
        SCP 150 AAP  
            Plate  4.5" H x 8.25" W x 0.1"D (4 gang)
11.4 cm H x 11.7 cm W x 0.3 cm D
            Board  2.9" H x 3.5" W x 0.5" D
7.4 cm H x 8.9 cm W x 1.3 cm D
[Allow at least 1.5" (3.8 cm) depth in the wall or furniture. Depth excludes connectors, knob, and buttons.]
  Product weight  0.3 lbs (0.1 kg)
  Shipping weight  2 lbs (1 kg)
  Vibration  ISTA 1A in carton (International Safe Transit Association)
  Listings  UL, CUL as a component of the System 5 IP
  Compliances  CE as a component of the System 5 IP
  MTBF  30,000 hours
  Warranty  3 years parts and labor
   NOTE  All nominal levels are at ±10%.
   NOTE  Specifications are subject to change without notice.
(7.51-020405-D5)

Diagram

SCP 150 System Diagram

Panel Drawing

SCP 150 Panel Drawing