SME 211 |
|
Video input |
Number/signal type | 1 HDMI digital video (HDCP compliant) |
Connectors | 1 female HDMI type A |
Horizontal frequency | 15 kHz to 100 kHz |
Vertical frequency | 24 Hz to 75 Hz |
Resolution range | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 640x480 to 1920x1200*
*reduced blanking |
Standards | DVI 1.0, HDMI 1.4a (HDCP 1.4) |
Format | RGB and YCbCr digital video |
|
Video processing |
Digital sampling | 8-, 10-, or 12-bits per channel, 165 MHz pixel clock (HDMI) |
Digital processing | 4:2:2, 8-bits per color |
Compression | H.264/AVC (ITU H.264, ISO/IEC 14496-10) 4:2:0, 8-bit color
Encoding profiles: High, Main, Baseline;
Encoding levels: 4.1, 4.0, 3.2, 3.1, 3.0; configurable GOP |
Bit rate | 200 kbps to 25 Mbps |
Bit rate control | Selectable (variable, constrained, or constant) |
Latency | 130 msec* (encode), 600 msec* (encode/decode)
*Indicates minimum latency. Encoder, decoder, and network dependencies apply. |
|
Video output |
Number/signal type | 1 H.264/AVC digital video over Ethernet
1 HDMI digital video |
Connectors | 1 female RJ-45 (streaming)
1 female HDMI type A |
Scaled resolution | HDMI output: 480p, 720p, 1080p, 512x288, 1024x768, 1280x1024 Stream: 480p, 720p, 1080p, 512x288, 1024x768, 1280x1024 |
Frame rate | Up to 60 fps for all output rates |
Formats | H.264/AVC (Profile type: High, Main, Baseline. Profile level: 4.1, 4.0, 3.2, 3.1, 3.0) |
NOTE | Appropriate HDMI to DVI-D cables or adapters are required for DVI signal output. |
|
|
Audio input |
Analog | |
Number/signal type | 1 stereo (balanced or unbalanced) |
Connectors | (1) 3.5 mm captive screw connectors, 5-pole |
Digital | |
Number/signal type | 1 stereo, digital de-embedded from HDMI |
Connectors | 1 female HDMI type A |
Impedance | >10k ohms unbalanced, >20k ohms balanced |
Nominal level | +4 dBu (1.23 Vrms), -10 dBV (316 mVrms), adjustable via input gain |
Maximum level | +18 dBu, (balanced or unbalanced) |
CMRR | >70 dB @ 20 Hz to 20 kHz |
Input gain adjustment | -18 dB to +24 dB, 0.1 dB steps, adjustable per input |
|
Audio processing |
Sampling rate | 16 bit, 48 kHz or 44.1 kHz sampling |
Compression | AAC-LC MPEG-4 (ISO/IEC 14496-3:2005) |
Bit rate | 80 kbps to 320 kbps, stereo |
|
Audio output — digital |
Number/signal type | 1 stereo, HDMI (re-embedded audio)
1 AAC-LC digital audio over Ethernet |
Connector | 1 female HDMI type A 1 female RJ-45 |
|
Communication |
USB | |
USB configuration port | 1 front panel female mini USB-B |
Mouse and keyboard port | Connect via any USB ports on SME 211 |
USB standards | USB 1.1, USB 2.0, high/full/low speed hosts |
Serial control | |
Serial control port | 1 bidirectional RS-232, rear panel 3.5 mm captive screw connector, 3-pole |
Host control | Host control (Extron SIS), bidirectional |
Protocols | Data bits: 7 or 8 (default)
Stop bits: 1 (default) or 2
Parity: odd, even, or no (default)
Flow control: no flow control (default) |
Baud rates | 9600 (default), 19200, 38400, 57600, 115200 |
Serial control pin configurations | 1 = Tx, 2 = Rx, 3 = Gnd |
Ethernet control | |
Ethernet host port | 1 female RJ-45 |
Ethernet data rate | 10/100/1000Base-T, half/full duplex with autodetect |
Maximum Transmission Unit | 1000-1500 MTU, adjustable |
Protocols | |
Streaming | Pull: RTP/RTCP (RFC 3550), RTSP (RFC 2326), Interleaved RTSP (RTP/RTSP), RTP/RTSP tunneled through HTTP unicast or multicast
Push: MPEG2-TS/UDP* (ISO/IEC 13818-1), MPEG2-TS/RTP* (RFC 2250, IPTV‑ID-0087, ETSI TS 102 034), Direct RTP (RFC 3984), SAP (RFC2974), SDP (RFC4566), unicast or multicast, RTMP |
Transport | TCP, UDP, multicast IGMPv3 (RFC 3376) or unicast |
All supported | IGMPv3 (RFC 3376), IP, UDP, SSL, DHCP, HTTP, HTTPS, RTP, RTSP, SNMP V2 (RFC 1213), SAP (RFC2974), SDP (RFC4566), QoS (RFC 2474), NTPv4 (RFC 4330) |
Ethernet default settings | IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = off
|
Program control | Extron Simple Instruction Set™ (SIS™) Extron DataViewer, Microsoft® Internet Explorer®, Apple® Safari®*, Mozilla® Firefox®*, Google®* Chrome™
(*Certain browser dependencies may apply.) |
NOTE | *Indicates that portions of the RFC and other standards may apply. |
|
|
USB device ports |
Number/signal type | (1) 2-port, USB hub |
Connectors | 2 female USB 2.0 type-A (1 front panel and 1 rear panel for storage) |
Maximum built-in USB hubs | 1 |
Minimum built-in USB hubs | 1 |
Available USB power | One port (selectable) with 1.5 A, remaining port with 0.5 A |
|
General |
Power supply | Internal
Input: 100-240 VAC, 50-60 Hz |
Power consumption | 23 watts typical |
Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Cooling | Fan, air flow front to rear |
Thermal dissipation | 50 BTU/hr |
Mounting | |
Rack mount | Yes, with optional rack shelf |
Enclosure type | Metal |
Enclosure dimensions | 1.66" H x 8.68" W x 9.5" D (1U high, half rack wide)
(42 mm H x 221 mm W x 216 mm D)
(Depth excludes connectors.) |
Product weight | 2.5 lbs (1.1 kg) |
Vibration | ISTA 1A in carton (International Safe Transit Association) |
Regulatory compliance | |
Safety | CE, c-UL, UL |
EMI/EMC | CE, C-Tick, FCC Class A, ICES, VCCI |
NOTE | CE and FCC testing is conducted with STP (shielded, twisted pair) cable. |
|
Environmental | Complies with the appropriate requirements of RoHS and WEEE. |
Product warranty | 3 years parts and labor |
Everlast power supply warranty | 7 years parts and labor |
NOTE | All nominal levels are at ±10%. |
|
NOTE | Specifications are subject to change without notice. |
|
(5985-D4) |