SW2 VGA DA2 A & SW2 VGA DA2 AF Retired

Two Input, Dual Output VGA and Stereo Audio Switchers & Distribution Amplifiers

Key Features

300 MHz (-3 dB) RGB video bandwidth
Compatible with VGA-QXGA and HDTV component video signals
Auto-input switching

The Extron SW2 VGA DA2 A & SW2 VGA DA2 AF

Model	Version Description	Part #
SW2 VGA DA2 A	Rear Inputs	60-297-11	Retired
SW2 VGA DA2 AF	Front & Rear Inputs	60-297-12	Retired

This product has been retired.

The Extron SW2 VGA DA2 A and SW2 VGA DA2 AF are combination active switchers and distribution amplifiers with stereo audio. Each switcher provides two inputs and dual buffered video outputs and PC audio buffering. Both models are ideal for presentation environments requiring a furniture-mountable switcher with the added convenience of a built-in distribution amplifier.

The SW2 VGA DA2 A and SW2 VGA DA2 AF provide 300 MHz (-3 dB) RGB video bandwidth and are compatible with VGA-QXGA and HDTV component video signals. Dual buffered video outputs allow for simultaneous viewing and recording of the selected input signal. Active PC audio buffering allows both models to input unbalanced audio on 3.5 mm stereo mini jacks, and output unbalanced and balanced audio on captive screw connectors. Balanced audio signals are much less susceptible to hum and interference over long cable runs.

The SW2 VGA DA2 A offers all input connections on the back panel while the SW2 VGA DA2 AF offers convenient access to I/O connections from the front panel. Front panel access makes the SW2 VGA DA2 AF an ideal solution for use in podium applications where one computer-video source is in a fixed location, and the second source is a laptop.

Features

Inputs: Two female 15-pin HD connectors for computer video; two 3.5 mm stereo mini jacks for audio

Outputs: Two female 15-pin HD connectors for computer video; captive screw connector for audio

300 MHz (-3 dB) RGB video bandwidth

Compatible with VGA-QXGA and HDTV component video signals

Dual buffered video and audio outputs — Allows for simultaneous viewing and recording of the selected input signal, eliminating the cost of a separate distribution amplifier.

ID bits from inputs 1 and 2 are routed to the local monitor output

Active PC audio buffering — Converts unbalanced PC audio to balanced, line level signals, eliminating noise over long cable runs.

Auto-input switching — Automatically switches to the highest-numbered input with an active video signal.

Contact closure remote control

1", half rack width metal enclosure

External Extron Everlast™ power supply included, replacement part #70-1175-01 — Provides worldwide power compatibility with high‑demonstrated reliability and low power consumption

Extron Everlast Power Supply is covered by a 7‑year parts and labor warranty

INCLUDED ACCESSORIES
	MBU 125	1/4 & 1/2 Rack Width, Under-Desk Mount Kit for Two-Piece Enclosure	70-077-01

INCLUDED ACCESSORIES

MBU 125

1/4 & 1/2 Rack Width, Under-Desk Mount Kit for Two-Piece Enclosure

70-077-01

OPTIONAL ACCESSORIES
	CCR 2BLB	Two-Button Contact Closure Remote With Customizable Backlit Buttons
	MBD 129	Through-Desk Mount Kit for 1/4 or 1/2 Rack Width, Two-Piece Enclosures
	RSU 126	Universal Rack Shelf Kit for 6" Deep Products
	ZipClip 50	Mounting Kit for PS 1205 C Power Supply

OPTIONAL ACCESSORIES

CCR 2BLB

Two-Button Contact Closure Remote With Customizable Backlit Buttons

MBD 129

Through-Desk Mount Kit for 1/4 or 1/2 Rack Width, Two-Piece Enclosures

RSU 126

Universal Rack Shelf Kit for 6" Deep Products

ZipClip 50

Mounting Kit for PS 1205 C Power Supply

SIMILAR PRODUCTS
	VSW 2VGA A	Two Input VGA and Stereo Audio Switcher

SIMILAR PRODUCTS

VSW 2VGA A

Two Input VGA and Stereo Audio Switcher

Specifications

SW2 VGA DA2 A/AF/AF R

Video

Gain

Unity

Bandwidth

300 MHz (-3 dB)

Video input

Number/signal type

2 VGA-QXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video*

Connectors

2 VGA female 15-pin HD

Nominal level

1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video

Minimum/maximum levels

Analog: 0.3 V to 1.5 Vp-p with no offset

Impedance

75 ohms

Horizontal frequency

15 kHz to 145 kHz

Vertical frequency

30 Hz to 170 Hz

Video output

Number/signal type

2 buffered VGA-QXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video*

Connectors

2 VGA female 15-pin HD

Nominal level

1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component video

Minimum/maximum levels

0.4 V to 1.8 Vp-p (follows input)

Impedance

75 ohms

NOTE	*RGsB, RsGsBs, and HDTV component video inputs and outputs work in manual mode only. Autoswitching requires TTL level sync on pin 13 of the 15-pin HD connector.

Sync

Input type

RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level sync

Output type

RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level sync

Input level

1.7 V to 5.0 Vp-p

Output level

TTL: 5.0 Vp-p, unterminated

Input impedance

510 ohms

Output impedance

50 ohms

Max. input voltage

5.0 Vp-p

Max. rise/fall time

40 ns

Polarity

Positive or negative (follows input)

Audio

Gain

Unbalanced output: 0 dB; balanced output: +6 dB

Frequency response

20 Hz to 20 kHz, ±0.05 dB

THD + Noise

0.03% @ 1 kHz at nominal level

S/N

>90 dB at maximum output (unweighted)

Crosstalk

<-65 dB @ 20 kHz, <-80 dB @ 1 kHz and below 60 Hz

Stereo channel separation

>80 dB @ 1 kHz

CMRR

>75 dB @ 20 Hz to 20 kHz

Audio input

Number/signal type

2 stereo, unbalanced

Connectors

(2) 3.5 mm female stereo jacks

Impedance

>10k ohms, balanced/unbalanced, AC coupled

Nominal level

-10 dBV (316 mVrms)

Maximum level

+8 dBV, (balanced or unbalanced) at 1% THD+N

NOTE	0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output

Number/signal type

1 stereo, balanced/unbalanced

Connectors

(1) 3.5 mm captive screw connector, 5 pole

Impedance

50 ohms unbalanced, 100 ohms balanced

Gain error

±0.1 dB channel to channel

Nominal level

-2 dBu balanced, -10 dBV (316 mVrms) unbalanced

Maximum level (Hi-Z)

>+16 dBu, balanced; >+8 dBV, unbalanced at 1% THD+N

Maximum level (600 ohm)

>+10 dBm, balanced; >+4 dBV, unbalanced at 1% THD+N

Control/remote — switcher

Contact closure

Momentary, on a 3.5 mm captive screw connector

Contact closure pin configurations

1 = input #1, 2 = input #2

General

Power

SW2 VGA DA2 A/AF

100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A power supply, regulated

SW2 VGA DA2 A/AF's power input requirements

12 VDC, 0.2 A

SW2 VGA DA2 AF R

100 VAC to 240 VAC, 50-60 Hz, 12 watts, internal

Ambient temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Cooling

Convection, no vents

Mounting

Rack mount

SW2 VGA DA2 A/AF

Yes, with optional 1U rack shelf

SW2 VGA DA2 AF R

Yes, with included rack mounting kit

Furniture mount

SW2 VGA DA2 A/AF

Yes, with included under-desk mounting kit

SW2 VGA DA2 AF R

Yes, with optional under-desk mounting kit

Pole mount

SW2 VGA DA2 A/AF

Yes, with optional PMK 200 pole mount kit

SW2 VGA DA2 AF R

Yes, with optional PMK 200 pole mount kit

Enclosure type

Metal

Enclosure dimensions

SW2 VGA DA2 A/AF

1.0" H x 8.75" W x 3.0" D
2.5 cm H x 22.2 cm W x 7.6 cm D
(Depth excludes connectors.)

SW2 VGA DA2 AF R

1.75" H x 17.4" W x 3.0" D (1U high, full rack wide)
4.4 cm H x 44.2 cm W x 7.6 cm D
(Depth excludes connectors.)

Product weight

SW2 VGA DA2 A/AF

1.1 lbs (0.5 kg)

SW2 VGA DA2 AF R

2.6 lbs (1.2 kg)

Shipping weight

SW2 VGA DA2 A/AF

4 lbs (2 kg)

SW2 VGA DA2 AF R

7 lbs (4 kg)

Vibration

ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

Safety

CE, c-UL, UL

EMI/EMC

CE, C-tick, FCC Class A, ICES, KCC, VCCI

Product warranty

3 years parts and labor

Everlast power supply warranty

7 years parts and labor

NOTE	All nominal levels are at ±10%.

NOTE	Specifications are subject to change without notice.

(8.1-061314-D8)

SW2 VGA DA2 A & SW2 VGA DA2 AF Retired

Features

Specifications

Diagram

Panel Drawing