SW2 VGA DA2 A/AF/AF R Retired

Two Input, Dual Output VGA and Stereo Audio Switchers & Distribution Amplifiers
Key Features
  • 300 MHz (-3 dB) RGB video bandwidth
  • Compatible with VGA-QXGA signals
  • Active PC audio to balanced audio interfacing
  • Autoswitching and manual modes available
The Extron SW2 VGA DA2 A/AF/AF R
Model Version Description Part #
 SW2 VGA DA2 A Rear Inputs 60-297-01 Retired
 SW2 VGA DA2 AF Front & Rear Inputs 60-297-02 Retired
 SW2 VGA DA2 AF R 1U w/ Front & Rear Inputs 60-368-01 Retired

This product has been retired.

Features

  • Inputs: Two female 15-pin HD connectors for computer-video; two 3.5 mm stereo mini jacks for audio
  • Outputs: Two female 15-pin HD connectors for computer-video; captive screw connector for audio
  • 300 MHz (-3 dB) RGB video bandwidth
  • Compatible with VGA-QXGA signals
  • Active PC audio to balanced audio interfacing
  • Two unbalanced audio inputs using stereo mini jacks and one balanced or unbalanced audio output using a captive screw connector
  • Autoswitching and manual modes available
  • Tactile switch buttons with LEDs and contact closure control
  • External universal ENERGY STAR® qualified power supply included, part # 70-055-01; accepts 12VDC through jack or captive screw connectors (SW2 VGA DA2 A/AF models only) — Provides worldwide compatibility, low power consumption, and reduced operating costs.
  • 1U, half rack and full rack width metal enclosures
  • Internal international power supply (SW2 VGA DA2 AF R only)
  • Unswitched AC outlet (600 watts max) (SW2 VGA DA2 AF R only)
  • Includes detachable ears for rack mounting (SW2 VGA DA2 AF R only)
  • Space for two single space Architectural Adapter Plates (AAPs) on the front and back of the switcher (SW2 VGA DA2 AF R only)
INCLUDED ACCESSORIES
  MBD 149 1U, Full Rack Width, Rack Mount and Through-Desk Kit for Four-Piece Enclosure 70-077-03
OPTIONAL ACCESSORIES
  MBD 129 Through-Desk Mount Kit for 1/4 or 1/2 Rack Width, Two-Piece Enclosures
  MBU 125 Low-Profile Mount Kit for 1/4 and 1/2 Rack Width, Two-Piece Enclosures
  MBU 149 Low-Profile Mount Kit for Full Rack Width, Four-Piece Enclosures
  CSR 6 Captive Screw to RCA Female Audio Adapter
  SYM BNCM 15-pin HD Male to BNC Male Mini High Resolution Cables
SIMILAR PRODUCTS
  SW VGA VGA and Stereo Audio Switcher
  VSW 2VGA A Two Input VGA and Stereo Audio Switcher

Specifications

SW2 VGA DA2 A/AF/AF R
Video
  Gain  Unity
  Bandwidth  300 MHz (-3dB)
Video input
  Number/signal type  2 VGA-UXGA RGBHV, RGBS, RGsB*, RsGsBs*
  Connectors  2 VGA 15-pin HD female
  Nominal level  0.7V p-p for RGB
  Minimum/maximum levels  Analog: 0.3V to 1.5V p-p with no offset
  Impedance  75 ohms
  Horizontal frequency  15 kHz to 145 kHz
  Vertical frequency  30 Hz to 170 Hz
Video output
  Number/signal type  2 buffered VGA-UXGA RGBHV, RGBS, RGsB*, RsGsBs*
  Connectors  2 VGA 15-pin HD female
  Nominal level  0.7V p-p for RGB
  Minimum/maximum levels  0.3V to 1.5V p-p
  Impedance  75 ohms
   NOTE  *RGsB and RsGsBs inputs and outputs will work in manual mode only. Autoswitching requires TTL level sync on pin 13 of the 15-pin HD connector.
Sync
  Input type  RGBHV, RGBS, RGsB*, RsGsBs*
  Output type  RGBHV, RGBS, RGsB*, RsGsBs*
  Input level  2.5V to 5.0V p-p
  Output level  TTL: 5.0V p-p, unterminated
  Input impedance  510 ohms
  Output impedance  75 ohms
  Max. input voltage  5.0V p-p
  Polarity  Positive or negative (follows input)
Audio
  Gain  Unbalanced output: 0dB; balanced output: +6dB
  Frequency response  20 Hz to 20 kHz, ±0.05dB
  THD + Noise  0.03% @ 1 kHz at nominal level
  S/N  >90dB at rated maximum output
  Crosstalk  <-65dB @ 20 kHz, <-80dB @ 1 kHz and below 60 Hz
  Stereo channel separation  >80dB @ 1 kHz
  CMRR  >75dB @ 20 Hz to 20 kHz
Audio input
  Number/signal type  2 stereo, unbalanced
  Connectors  (2) 3.5 mm female stereo jacks
  Impedance  >50 kohms unbalanced, >25 kohms balanced, DC coupled
  Nominal level  -10dBV (316mV)
  Maximum level  +19.5dBu, (balanced or unbalanced) at1%THD+N
Audio output
  Number/signal type  1 stereo, balanced/unbalanced
  Connectors  (1) 3.5 mm captive screw connector, 5 pole
  Impedance  50 ohms unbalanced, 100 ohms balanced
  Gain error  ±0.1dB channel to channel
  Nominal level  -4dBV (63.1mV)
  Maximum level (Hi-Z)  >+26dBu, balanced; >+21dBu, unbalanced at 1%THD+N
  Maximum level (600 ohm)  >+21dBm, balanced; >+15dBm, unbalanced at 1%THD+N
   NOTE  0dBu = 0.775 volts (RMS).
Control/remote — switcher
  Contact closure  Momentary, on a 3.5 mm captive screw connector
  Contact closure pin configurations  1 = Input #1, 2 = Input #2
  Loop signal  Momentary low, 250 µs
General
  Power   
        SW2 VGA DA2 A/AF  100VAC to 240VAC, 50/60 Hz, external, auto-switchable; to 12VDC, 1A power supply.
        SW2 VGA DA2 AF R  100VAC to 120VAC, 50/60 Hz, 12 watts, internal, autoswitchable
  Temperature/humidity  Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing
  Rack mount  
        SW2 VGA DA2 A/AF  No, but furniture mountable with optional brackets
        SW2 VGA DA2 AF R  Yes, with included brackets, and furniture mountable with optional brackets
  Enclosure type  Metal
  Enclosure dimensions  
        SW2 VGA DA2 A/AF  1.0" H x 10.0" W x 4.4" D
2.5 cm H x 25.4 cm W x 11.2 cm D
(Depth excludes connectors.)
        SW2 VGA DA2 AF R  1.75" H x 17.5" W x 4.5" D (1U high, full rack width)
4.4 cm H x 44.5 cm W x 11.4 cm D
(Depth excludes connectors.)
  Product weight  
        SW2 VGA DA2 A/AF  1.1 lbs (0.5 kg)
        SW2 VGA DA2 AF R  2.6 lbs (1.2 kg)
  Shipping weight   
        SW2 VGA DA2 A/AF  4 lbs (1.8 kg)
        SW2 VGA DA2 AF R  
7 lbs (3.2 kg)...............  
  Vibration  ISTA/NSTA 1A in carton (International Safe Transit Association)
  Listings  UL, CUL
  Compliances  CE, FCC Class A
  MTBF  30,000 hours
  Warranty  3 years parts and labor
   NOTE   Specifications are subject to change without notice.
(7.40-021403-D2)

Diagram

SW2 VGA DA2 A/AF/AF R System Diagram

Panel Drawing

SW2 VGA DA2 A/AF/AF R Panel Drawing