VN-Matrix 300 Series |
|
Video |
Signal Type | SDI, HD-SDI, 3G-SDI digital video |
Resolution | 8 or 10 bits, automatic |
Data rates | 270 Mbps, 1.485 Gbps, 2.970 Gbps. |
Operation standards | SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 424M |
Auto data rate lock | Yes |
|
Video input and loop through — encoder |
Number/signal type | 1 digital component video with loop through 10 bit, 4:2:2, with auto-detection |
Connectors | 2 female BNC: 1 for input, 1 for loop through |
Nominal level | 0.8 Vp-p |
Impedance | 75 ohms |
Data rates | 19 Mbps to 2.97 Gbps |
Vertical frequency | 23.97 Hz to 60 Hz, depending on signal format |
Resolution range | 525i, 625i, 720p, 1080i, 1080p, 1080psf |
|
Video processing — decoder |
Compression | PURE3™ Codec |
Frame rate delay | 35 ms (70 ms encoding/decoding end-to-end) |
Bit rate | 6 Mbps to 250 Mbps |
Bit and frame rate control | Selectable |
Frame rate | Up to 60 fps @ 1080p |
|
Video output — decoder |
Number/signal type | 1 digital component video 10 bit, 4:2:2, with auto-detection |
NOTE | Output signal format follows the input format at the encoder. |
|
Connectors | 1 female BNC |
Nominal level | 0.8 Vp-p |
Impedance | 75 ohms |
Vertical frequency | 23.97 Hz to 60 Hz, depending on signal format |
Resolutions | 525i, 625i, 720p, 1080i, 1080p, 1080psf |
|
Sync — genlock — decoder |
External sync (genlock) | 0.8 Vp-p (digital component video) |
Genlock connector | 1 female BNC |
Output impedance | 75 ohms |
Vertical frequency | 23.97 Hz to 60 Hz, depending on signal format |
|
Audio input and output |
Number/signal type | 4 groups of 4 channels, embedded with video signal |
Source formats | SMPTE 299M, SMPTE 272M |
Connectors | 1 female BNC (shared with video input) |
|
Audio processing |
Compression | None |
Standards | SMPTE 299M, SMPTE 272M-A |
Sampling Rates | 20 or 24 bit digital audio 48 kHz (synchronous), 32 - 48 kHz (asynchronous) |
|
Control/remote — local host — codecs, decoders |
Serial control port | (1) RS-232, male 9-pin D connector |
Baud rate and protocol | 115200 baud, 8 data bits, 1 stop bit, no parity, no flow control |
Serial control pin configurations | 1 = DCD, 2 = Rx, 3 = Tx, 4 = DTR, 5 = GND, 6 = DSR, 7 = RTS, 8 = CTS, 9 = ring |
USB control ports | 2 female USB, non-operational |
Ethernet control port | 1 female RJ-45 1 female SPF IP module |
Ethernet data rate | 10/100/1000Base-T, half/full duplex with autodetect |
Ethernet protocol | ICMP (ping), IP, TCP, RTP, RTCP, UDP, DHCP, HTTP, SMTP, Telnet |
System control | VN-Matrix Enterprise Controller, VN-Matrix Enterprise Retundant Controller VN-Matrix Web server |
Program control | Extron control/configuration software (VNM Viewer, VNM Virtual Switch) for Windows® Extron Command Line Interface (CLI) Microsoft® Internet Explorer® and other Web browsers, Telnet |
|
Network transport |
Ethernet data rate | 10/100/1000Base-T, half/full duplex with autodetect |
Ethernet protocol | |
Streaming | RTP, RTCP |
Transport | TCP, UDP (unicast or multicast) |
All supported | ICMP (ping), IP, TCP, RTP, RTCP, UDP, DHCP, HTTP, SNMP V3, Telnet |
Video input/output | PURE3™ Codec compression |
Audio input/output | Pass-through |
|
General |
External Power supply | 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 5 A max. |
Power consumption | 30 watts nominal, 60 watts max. |
Ambient temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +41 to +95 °F (5 to +35 °C) / 10% to 85%, noncondensing |
Cooling | Fan, vents front to back |
Mounting | |
Rack mount | Yes |
Enclosure type | Metal |
Enclosure | 1.75" H* x 8.5" W x 12.2" D (1U high, half rack wide) (4.4 cm H* x 21.5 cm W x 30.9 cm D) *Height with feet is 2.1" (5.3 cm). (Depth includes connectors.) |
Product weight | 2.8 lbs (1.3 kg) each |
Regulatory compliance | |
Safety | CE, UL |
EMI/EMC | CE, EN60950-1 |
Product warranty | 3 years parts and labor |
Everlast power supply warranty | 7 years parts and labor |
NOTE | All nominal levels are at ±10%. |
|
NOTE | Specifications are subject to change without notice. |
|
(4083-D3) |