Product Home
Audio Products
DSP, Expansion & Software
DSP, Expansion & Software Power Amplifiers Speakers Audio De-Embedders & Embedders Microphones Mixers & Preamps Switching & Distribution Audio Distribution Amplifiers Audio Switchers VoiceLift Pro Accessories Audio Control Panels Audio Wallplates Audio Accessories Speaker Accessories Amplifier Accessories Audio AAP and MAAP Modules Cables & Adapters Audio Adapters Audio Connectors Audio Cables
AXI 22 AT D Plus

New Pro

AXI 22 AT D Plus

2 Input, 2 Output Dante Audio Interface - Decorator-Style Wallplate

Key Features

Two mic/line inputs on XLR connectors insert audio onto a Dante® network
Two line outputs on a rear panel captive screw connector extract audio from a Dante network
Dante audio networking provides a wide range of expansion capabilities
New Controllable via the Dante network
Studio grade 24-bit analog-to-digital and digital-to-analog converters selectable up to 96 kHz
Compatible with Extron WPD 100 Series wallplates
All Features

AXI 22 AT D Plus with Included White Decorator-Style Wallplate

AXI 22 AT D Plus - Cover Plate Removed Showing USB Configuration Port

AXI 22 AT D Plus with Included Black Decorator-Style Wallplate

AXI 22 AT D Plus and WPD 102 XLRM with Included White Decorator-Style Wallplate

AXI 22 AT D Plus and WPD 102 XLRM - Front and Back

AXI 22 AT D Plus and WPD 102 XLRM with Included Black Decorator-Style Wallplate

AXI 22 AT D Plus and WPD 102 XLRM - Kit Pieces

Previous Next

Image Gallery

Interactive Overview

AXI 22 AT D Plus

Provide a remotely controllable, single-gang decorator-style Dante™ audio interface that shall support two mono analog inputs capable of microphone or line level signals, placed directly onto a Dante audio network, and two mono analog line level outputs for audio received from the Dante network.
1. Two input, two output, single-gang decorator-style audio expansion interface with Dante audio networking, and 24-bit audio converters
  1. Input Requirements
    1. Shall support two mono, microphone or line level, balanced or unbalanced signals on two female XLR connectors
    2. Shall provide selectable +48 volt phantom power for condenser microphones on each mic/line input
    3. Shall provide analog to digital conversion at selectable sampling rates with 24-bit resolution via Dante Controller
      1. Shall support 44.1, 48, 88.2, and 96 kHz sampling rates
  2. Output Requirements
    1. Shall support two mono line level, balanced or unbalanced signals on one 6-pole, 3.5 mm captive screw connector
      1. Outputs will be routed from Dante audio network
    2. Shall provide digital to analog conversion at selectable sampling rates with 24-bit resolution via Dante Controller
Shall support 44.1, 48, 88.2, and 96 kHz sampling rates
1. Configuration Software Requirements
  1. Shall provide PC-based DSP Configurator software allowing flexible control of the audio expansion interface’s fixed architecture
  2. Shall provide a Live mode for real-time control of parameters
  3. Shall provide an Emulate mode for offline configuration
  4. Shall provide a single window view of all inputs and outputs
  5. Shall provide setup and configuration of processing blocks including, but not limited to: gain stages, channel mute, and phantom power
  6. Shall provide cut, copy, and paste editing between processing blocks
  7. Shall provide real-time metering of levels within each processing block in Live mode
  8. Shall provide a Meter Bridge window for real-time metering of all input and output channels with clipping indication in Live mode
  9. Shall provide keyboard-based navigation of configuration software utilizing bidirectional controls, keyboard shortcuts, and spreadsheet software-style commands
  10. Shall provide file saving in both Live and Emulate mode
  11. Shall provide file upload in both Live and Emulate mode
  12. Shall provide configuration and file saving of multiple, linked or networked processors from a single configuration session
2. Dante Audio Networking Requirements
  1. Shall support incoming and outgoing channels over a local area network using standard Internet protocols
    1. Up to two outgoing Dante channels may be routed to a Dante-equipped digital signal processor
    2. Up to two incoming Dante channels from a Dante-equipped digital signal processor may be tied to the audio interface’s output section
  2. Shall support Dante Controller software for digital audio network configuration
  3. Shall support Dante Domain Manager network management software for network security and logical segmenting.
  4. Shall support the AES67 standard for interoperability with other devices that also support AES67
  5. Shall provide an RJ-45 connector to support Dante audio network connection
  6. Shall provide uncompressed digital audio at selectable sampling rates with 24-bit resolution via Dante Controller
  7. Shall support 44.1, 48, 88.2, and 96 kHz sampling rates
3. Control Requirements
  1. Shall provide Ethernet monitoring and control via the Dante protocol using DSP Configurator software
  2. Shall support remote control operation via USB using DSP Configurator software
4. Front Panel Requirements
  1. Shall provide two mono mic/line level inputs on female XLR connectors
  2. Shall provide one USB-C port for connection to a Windows computer running DSP Configurator Software
    1. Shall be concealed behind a removable cover plate
  3. Shall provide a reset button
    1. Shall be concealed behind a removable cover plate
5. Rear Panel Requirements
  1. Shall provide an RJ-45 connector to support Dante digital audio network connection, up to two outgoing digital audio channels, up to two incoming digital audio channels, and PoE - Power over Ethernet
  2. Shall provide two balanced or unbalanced line level outputs on 6-pole, 3.5 mm captive screw connector
6. General Requirements
  1. Shall support optional energy-efficient external universal power supply with 2-pole captive screw connector
    1. Shall be universal in-line power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
    2. Shall provide output of 12 VDC, 0.5 A, 6 watts
    3. Shall support use of optional Extron ZipClip™ 100 mounting kit
    4. Shall meet energy efficiency level V and bear the UL Environment Energy Efficiency Certification (EEC) Mark
  2. Shall support remote powering through PoE with RJ-45 connection
    1. Shall conform to 802.3af standard
  3. Shall mount in an included decorator-style wallplate
  4. Shall include both black and white faceplates
  5. Shall meet regulatory compliances
    1. Shall meet safety compliances under CE and c-UL
    2. Shall meet EMI/EMC compliances under CE, C-Tick, c-UL, FCC Class A, ICES, and VCCI
    3. Shall comply with appropriate requirements of RoHS and WEEE
  6. Shall provide three years parts and labor warranty
Approved device shall be the Extron AXI 22 AT D Plus, part number 60-1947-01; no alternates or equals.

AXI 22 AT D Plus

Provide a remotely controllable, single-gang decorator-style Dante™ audio interface that shall support two mono analog inputs capable of microphone or line level signals, placed directly onto a Dante audio network, and two mono analog line level outputs for audio received from the Dante network.
1. Two input, two output, single-gang decorator-style audio expansion interface with Dante audio networking, and 24-bit audio converters
  1. Input Requirements
    1. Shall support two mono, microphone or line level, balanced or unbalanced signals on two female XLR connectors
    2. Shall provide selectable +48 volt phantom power for condenser microphones on each mic/line input
    3. Shall provide analog to digital conversion at selectable sampling rates with 24-bit resolution via Dante Controller
      1. Shall support 44.1, 48, 88.2, and 96 kHz sampling rates
  2. Output Requirements
    1. Shall support two mono line level, balanced or unbalanced signals on one 6-pole, 3.5 mm captive screw connector
      1. Outputs will be routed from Dante audio network
    2. Shall provide digital to analog conversion at selectable sampling rates with 24-bit resolution via Dante Controller
Shall support 44.1, 48, 88.2, and 96 kHz sampling rates
1. Configuration Software Requirements
  1. Shall provide PC-based DSP Configurator software allowing flexible control of the audio expansion interface’s fixed architecture
  2. Shall provide a Live mode for real-time control of parameters
  3. Shall provide an Emulate mode for offline configuration
  4. Shall provide a single window view of all inputs and outputs
  5. Shall provide setup and configuration of processing blocks including, but not limited to: gain stages, channel mute, and phantom power
  6. Shall provide cut, copy, and paste editing between processing blocks
  7. Shall provide real-time metering of levels within each processing block in Live mode
  8. Shall provide a Meter Bridge window for real-time metering of all input and output channels with clipping indication in Live mode
  9. Shall provide keyboard-based navigation of configuration software utilizing bidirectional controls, keyboard shortcuts, and spreadsheet software-style commands
  10. Shall provide file saving in both Live and Emulate mode
  11. Shall provide file upload in both Live and Emulate mode
  12. Shall provide configuration and file saving of multiple, linked or networked processors from a single configuration session
2. Dante Audio Networking Requirements
  1. Shall support incoming and outgoing channels over a local area network using standard Internet protocols
    1. Up to two outgoing Dante channels may be routed to a Dante-equipped digital signal processor
    2. Up to two incoming Dante channels from a Dante-equipped digital signal processor may be tied to the audio interface’s output section
  2. Shall support Dante Controller software for digital audio network configuration
  3. Shall support Dante Domain Manager network management software for network security and logical segmenting.
  4. Shall support the AES67 standard for interoperability with other devices that also support AES67
  5. Shall provide an RJ-45 connector to support Dante audio network connection
  6. Shall provide uncompressed digital audio at selectable sampling rates with 24-bit resolution via Dante Controller
  7. Shall support 44.1, 48, 88.2, and 96 kHz sampling rates
3. Control Requirements
  1. Shall provide Ethernet monitoring and control via the Dante protocol using DSP Configurator software
  2. Shall support remote control operation via USB using DSP Configurator software
4. Front Panel Requirements
  1. Shall provide two mono mic/line level inputs on female XLR connectors
  2. Shall provide one USB-C port for connection to a Windows computer running DSP Configurator Software
    1. Shall be concealed behind a removable cover plate
  3. Shall provide a reset button
    1. Shall be concealed behind a removable cover plate
5. Rear Panel Requirements
  1. Shall provide an RJ-45 connector to support Dante digital audio network connection, up to two outgoing digital audio channels, up to two incoming digital audio channels, and PoE - Power over Ethernet
  2. Shall provide two balanced or unbalanced line level outputs on 6-pole, 3.5 mm captive screw connector
6. General Requirements
  1. Shall support optional energy-efficient external universal power supply with 2-pole captive screw connector
    1. Shall be universal in-line power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
    2. Shall provide output of 12 VDC, 0.5 A, 6 watts
    3. Shall support use of optional Extron ZipClip™ 100 mounting kit
    4. Shall meet energy efficiency level V and bear the UL Environment Energy Efficiency Certification (EEC) Mark
  2. Shall support remote powering through PoE with RJ-45 connection
    1. Shall conform to 802.3af standard
  3. Shall mount in an included decorator-style wallplate
  4. Shall include both black and white faceplates
  5. Shall meet regulatory compliances
    1. Shall meet safety compliances under CE and c-UL
    2. Shall meet EMI/EMC compliances under CE, C-Tick, c-UL, FCC Class A, ICES, and VCCI
    3. Shall comply with appropriate requirements of RoHS and WEEE
  6. Shall provide three years parts and labor warranty
Approved device shall be the Extron AXI 22 AT D Plus, part number 60-1947-01; no alternates or equals.

Add Item to Cart

Order Message Number

Part #

Note: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.

Qty

Current Total:

View Cart

AXI 22 AT D Plus -

Product Details

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.