Product Home
Extenders & Line Drivers
USB Extenders
HDMI Extenders DVI Extenders DisplayPort Extenders HD-SDI, 3G-SDI & 12G-SDI Extenders VGA & RGB Line Drivers & Extenders AV Line Drivers & Extenders Wireless Extenders
FOX USB Extender Plus
FOX USB Extender Plus UCS 900 Series USB Extender Plus Series

Pro

FOX USB Extender Plus

Fiber Optic Extender for USB Peripherals

Key Features

Extends USB peripherals very long distances over fiber optic cabling
Supports USB 2.0 to 1.0 devices and USB 3.0 devices that can operate at USB 2.0 data rates of up to 480 Mbps
Receiver features an integrated four-port hub with 5 Volts, 500 mA available on each port
Peripheral emulation
Real-time status LED indicators for troubleshooting and monitoring
Compatible with Extron FOX Matrix Switchers for signal distribution systems up to 1000x1000 and larger
All Features

Previous Next

Image Gallery

Interactive Overview

FOX T USB Extender Plus MM

Shall provide a transmitter that supports long-haul transmission of USB signals over multimode fiber optic cabling
1. Long distance signal extension for USB peripherals over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus MM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus MM (60-1474-11); no alternates or equals

FOX T USB Extender Plus MM

Shall provide a transmitter that supports long-haul transmission of USB signals over multimode fiber optic cabling
1. Long distance signal extension for USB peripherals over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus MM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus MM (60-1474-11); no alternates or equals

FOX R USB Extender Plus MM

Shall provide a receiver that supports long-haul transmission of USB signals over multimode fiber optic cabling
1. Long distance signal extension for USB peripherals over fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus MM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus MM (60-1474-21); no alternates or equals

FOX R USB Extender Plus MM

Shall provide a receiver that supports long-haul transmission of USB signals over multimode fiber optic cabling
1. Long distance signal extension for USB peripherals over fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus MM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus MM (60-1474-21); no alternates or equals

FOX T USB Extender Plus SM

Shall provide a transmitter that supports long-haul transmission of USB signals over singlemode fiber optic cabling
1. Long distance signal extension for USB peripherals over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus SM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus SM (60-1474-12); no alternates or equals

FOX T USB Extender Plus SM

Shall provide a transmitter that supports long-haul transmission of USB signals over singlemode fiber optic cabling
1. Long distance signal extension for USB peripherals over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus SM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus SM (60-1474-12); no alternates or equals

FOX R USB Extender Plus SM

Shall provide a receiver that supports long-haul transmission of USB signals over singlemode fiber optic cabling
1. Long distance signal extension for USB peripherals over fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus SM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus SM (60-1474-22); no alternates or equals

FOX R USB Extender Plus SM

Shall provide a receiver that supports long-haul transmission of USB signals over singlemode fiber optic cabling
1. Long distance signal extension for USB peripherals over fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus SM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus SM (60-1474-22); no alternates or equals

FOX T USB Extender Plus HID MM

Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus HID MM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus HID MM (60-1526-11); no alternates or equals

FOX T USB Extender Plus HID MM

Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus HID MM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus HID MM (60-1526-11); no alternates or equals

FOX R USB Extender Plus HID MM

Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for supported peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus HID MM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus HID MM (60-1526-21); no alternates or equals

FOX R USB Extender Plus HID MM

Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over multimode fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for supported peripheral devices
    1. Provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over multimode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 2 km (1.25 miles) over OM3 or OM4 multimode fiber optic cabling
  2. Shall support an optical loss budget of at least 7 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus HID MM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus HID MM (60-1526-21); no alternates or equals

FOX T USB Extender Plus HID SM

Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus HID SM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus HID SM (60-1526-12); no alternates or equals

FOX T USB Extender Plus HID SM

Shall provide a transmitter that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
2. USB input requirements
  1. Shall provide one (1) USB Type B connector on the rear panel for host computer
    1. Provide peripheral emulation for a virtual connection of a keyboard and mouse to the host computer
    2. Provide the capability to configure the unit with peripheral emulation disabled
  2. Shall support USB 2.0, 1.1, or 1.0 hosts
  3. Shall support USB 3.0 hosts that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, and host status
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX R USB Extender Plus HID SM fiber optic receiver for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron FOX T USB Extender Plus HID SM (60-1526-12); no alternates or equals

FOX R USB Extender Plus HID SM

Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Shall provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Shall provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus HID SM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus HID SM (60-1526-22); no alternates or equals

FOX R USB Extender Plus HID SM

Shall provide a receiver that supports long-haul transmission of USB signals for human interface device – HID types and smart card readers
1. Long distance signal extension of USB HID and smart card readers over singlemode fiber optic cabling
2. USB output requirements
  1. Shall provide an integrated four-port hub of USB Type A connectors on the rear panel for peripheral devices
    1. Shall provide 5 Volts, 500 mA on each port to power a peripheral device
    2. Shall provide the capability to charge a peripheral device that is connected to a hub port
  2. Shall support USB 2.0, 1.1, or 1.0 devices
  3. Shall support USB 3.0 devices that can operate at USB 2.0 rates
  4. Shall support data transfer rates up to 480 Mbps
  5. Shall provide device class filtering to recognize only authorized device types
    1. Allow connection of HID and smart card reader device classes only
    2. Prevent connection of unauthorized hardware, such as a storage device
    3. Factory-configured to ensure device class filtering cannot be removed or altered in the field
3. Interconnection requirements
  1. Shall provide interconnection between transmitter and receiver over singlemode fiber optic cabling
  2. Shall provide two (2) LC-type fiber optic connectors on rear panel
4. Transmission requirement
  1. Shall provide a fiber optic signal transmission distance capability of 30 km (18.75 miles) over singlemode fiber optic cabling
  2. Shall support an optical loss budget of at least 13 dB between transmitter and receiver
5. Setup, control, and configuration requirements
  1. Shall provide one (1) bidirectional RS-232 2.5 mm jack on front panel for setup and configuration
6. Power requirements
  1. Shall be equipped with an external, universal AC power supply capable of supporting 100 - 240 VAC, 50/60 Hz power
7. General requirements
  1. Shall be a 1” (2.5 cm) high, quarter rack width metal enclosure
  2. Shall be rack mountable with optional rack shelf or rack mounting brackets
  3. Shall be wall or furniture mountable with optional mounting kits
  4. Shall provide LED indicators on the front panel for power, link status, host status, and each hub port activity
  5. Shall provide LED indicators on rear panel for link status
  6. Shall meet regulatory compliances
    1. CE, c-UL, UL
    2. CE, C-tick, FCC Class A, ICES, VCCI
    3. RoHS, WEEE
  7. Shall provide at least three (3) years parts and labor warranty
  8. Shall be compatible with the Extron FOX T USB Extender Plus HID SM fiber optic transmitter for USB peripherals
  9. Shall be compatible with Extron FOX Series matrix switchers to create a signal distribution system up to 1000x1000 and larger
8. Approved device shall be the Extron R FOX USB Extender Plus HID SM (60-1526-22); no alternates or equals

Add Item to Cart

Order Message Number

Part #

Note: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.

Qty

Current Total:

View Cart

FOX USB Extender Plus -

Product Details

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.