Product Home
Power Amplifiers
Power Amplifiers
Network Power Amplifiers
XPA 2001
MPA 152 Plus MPA 601 XPA 1002 XPA 2001 XPA 2004 XPA 4002 XPA U 1002 XPA U 1004 XPA U 1004 SB XPA U 2002 SB XPA U 2004 FX XPA U 2008 FX XPA U 3502 XPA U 358 XPA U 358C XPA U 4004 FX XPA U 758

Pro

XPA 2001

Mono 70/100 V Amplifier - 200 Watts

Key Features

200 watts rms output power:
XPA 2001-70V - 1 x 200 watts @ 70 volts
XPA 2001-100V - 1 x 200 watts @ 100 volts
ENERGY STAR® qualified amplifier
Professional grade signal-to-noise and THD+N performance
Extron Patented CDRS™ - Class D Ripple Suppression
Convection cooled, fanless operation
Ultra low inrush current - no need for power sequencing
All Features

XPA 2001-70V - 70 V Mono Amp - 200 Watts

XPA 2001-100V - 100 V Mono Amp - 200 Watts

Previous Next

Image Gallery

This new tool now allows you to search for amplifier models by features

A&E Specifications

Case Studies

Overview
Video
Description
Specifications
Diagram
Panel Drawing
Downloads

Overview

The Extron XTRA™ Series XPA 2001 is a half rack 1U, convection cooled power amplifier delivering 200 watts into a 70 volt or 100 volt line. This professional grade amplifier features a 100 dB signal-to-noise ratio with less than 0.1% THD+N. The XPA 2001 is an ENERGY STAR® qualified amplifier with an Extron exclusive, highly efficient, advanced Class D amplifier design. It also features patented CDRS™ - Class D Ripple Suppression technology that provides a smooth, clean audio waveform and an improvement in signal fidelity over conventional Class D amplifiers. The XPA 2001 is housed in a half rack width metal enclosure, conserving rack space and weighing only 2.5 lbs (1.1 kg). The Extron exclusive, high efficiency design generates very little heat and allows the amplifier to be convection cooled.

Video

Description

Specifications

Diagram

Panel Drawing

Downloads

XPA 2001-70V

Provide a compact, energy efficient audio amplifier that shall support one analog stereo input or two mono inputs, and one mono amplified output with 200 watts rms power output into a 70 volt line.
1. Compact mono amplifier with 200 watts rms power output into a 70 volt line and ENERGY STAR^® qualification
  1. Input Requirements
    1. Shall support one stereo or two mono, balanced or unbalanced signals on one 5-pole, 3.5 mm captive screw connector
    2. Shall actively sum incoming left and right channels for mono amplification
  2. Output Requirements
    1. Shall support one high impedance stereo speaker level signal on one 2-pole, 5 mm screw-lock captive screw connector
    2. Shall provide a total of 200 watts rms output power into a 70 volt line measured at 1 kHz with less than 0.1% THD
    3. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    4. Shall support a minimum load impedance of 25 ohms
    5. Shall provide a THD+N measurement of less than 0.1% measured at 1 kHz and 3 dB below clipping
    6. Shall provide damping factor of greater than 100 at 25 ohms
    7. Shall provide a switch-selectable high pass filter for frequencies below 80 Hz with a 12 dB per octave rolloff
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 45 watts during typical (1/8 power) operation
    2. Shall draw 12 watts during quiescent operation
    3. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall provide low power draw of less than 1 watt while in standby mode
      3. Shall return to full power status in less than one second upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -40 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    4. Shall be ENERGY STAR qualified
    5. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote control of volume and muting on 5-pole, 3.5 mm captive screw connector using optional Extron analog volume and mute controllers
    2. Shall support remote standby control on 5-pole, 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide an LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide a green LED for input signal presence indication
    4. Shall provide a red LED for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide one input on one 5-pole, 3.5 mm captive screw connector
    2. Shall provide one output on one 2-pole, 5 mm screw-lock captive screw connector
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide remote volume, mute, and standby control port on one 5-pole, 3.5 mm captive screw connector
    4. Shall provide a recessed, detented potentiometer for attenuation adjustment
    5. Shall provide a switch for selecting a high pass filter to roll off frequencies below 80 Hz
    6. Shall provide a green LED for input signal presence indication
    7. Shall provide a red LED for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, half rack width metal enclosure
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under BSMI, CCC, CE, c-UL, GS, KC Mark, PSE, S Mark, and UL
      2. Shall be UL listed for plenum airspaces and meet UL 2043 compliance for heat and smoke release, excluding the power supply when used with an optional Extron Flexible Conduit Adapter Kit
      3. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      4. Shall meet EMI/EMC compliances under CE, CISPR 22 Class B, C-tick, FCC Class B, ICES, and VCCI Class B
      5. Shall comply with appropriate requirements of ENERGY STAR, EU code of conduct, RoHS, and WEEE
    3. Shall provide three year parts and labor warranty
2. Approved device shall be the Extron XPA 2001-70V, part number 60-850-01; no alternates or equals.

XPA 2001-70V

Provide a compact, energy efficient audio amplifier that shall support one analog stereo input or two mono inputs, and one mono amplified output with 200 watts rms power output into a 70 volt line.
1. Compact mono amplifier with 200 watts rms power output into a 70 volt line and ENERGY STAR^® qualification
  1. Input Requirements
    1. Shall support one stereo or two mono, balanced or unbalanced signals on one 5-pole, 3.5 mm captive screw connector
    2. Shall actively sum incoming left and right channels for mono amplification
  2. Output Requirements
    1. Shall support one high impedance stereo speaker level signal on one 2-pole, 5 mm screw-lock captive screw connector
    2. Shall provide a total of 200 watts rms output power into a 70 volt line measured at 1 kHz with less than 0.1% THD
    3. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    4. Shall support a minimum load impedance of 25 ohms
    5. Shall provide a THD+N measurement of less than 0.1% measured at 1 kHz and 3 dB below clipping
    6. Shall provide damping factor of greater than 100 at 25 ohms
    7. Shall provide a switch-selectable high pass filter for frequencies below 80 Hz with a 12 dB per octave rolloff
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 45 watts during typical (1/8 power) operation
    2. Shall draw 12 watts during quiescent operation
    3. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall provide low power draw of less than 1 watt while in standby mode
      3. Shall return to full power status in less than one second upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -40 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    4. Shall be ENERGY STAR qualified
    5. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote control of volume and muting on 5-pole, 3.5 mm captive screw connector using optional Extron analog volume and mute controllers
    2. Shall support remote standby control on 5-pole, 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide an LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide a green LED for input signal presence indication
    4. Shall provide a red LED for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide one input on one 5-pole, 3.5 mm captive screw connector
    2. Shall provide one output on one 2-pole, 5 mm screw-lock captive screw connector
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide remote volume, mute, and standby control port on one 5-pole, 3.5 mm captive screw connector
    4. Shall provide a recessed, detented potentiometer for attenuation adjustment
    5. Shall provide a switch for selecting a high pass filter to roll off frequencies below 80 Hz
    6. Shall provide a green LED for input signal presence indication
    7. Shall provide a red LED for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, half rack width metal enclosure
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under BSMI, CCC, CE, c-UL, GS, KC Mark, PSE, S Mark, and UL
      2. Shall be UL listed for plenum airspaces and meet UL 2043 compliance for heat and smoke release, excluding the power supply when used with an optional Extron Flexible Conduit Adapter Kit
      3. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      4. Shall meet EMI/EMC compliances under CE, CISPR 22 Class B, C-tick, FCC Class B, ICES, and VCCI Class B
      5. Shall comply with appropriate requirements of ENERGY STAR, EU code of conduct, RoHS, and WEEE
    3. Shall provide three year parts and labor warranty
2. Approved device shall be the Extron XPA 2001-70V, part number 60-850-01; no alternates or equals.

XPA 2001-100V

Provide a compact, energy efficient audio amplifier that shall support one analog stereo input or two mono inputs, and one mono amplified output with 200 watts rms power output into a 100 volt line.
1. Compact mono amplifier with 100 watts rms power output into a 100 volt line and ENERGY STAR^® qualification
  1. Input Requirements
    1. Shall support one stereo or two mono, balanced or unbalanced signals on one 5-pole, 3.5 mm captive screw connector
    2. Shall actively sum incoming left and right channels for mono amplification
  2. Output Requirements
    1. Shall support one high impedance speaker level signal on one 2-pole, 5 mm screw-lock captive screw connector
    2. Shall provide a total of 200 watts rms output power into a 100 volt line measured at 1 kHz with less than 0.1% THD
    3. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    4. Shall support a minimum load impedance of 50 ohms
    5. Shall provide a THD+N measurement of less than 0.1% measured at 1 kHz and 3 dB below clipping
    6. Shall provide damping factor of greater than 100 at 50 ohms
    7. Shall provide a switch-selectable high pass filter for frequencies below 80 Hz with a 12 dB per octave rolloff
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 45 watts during typical (1/8 power) operation
    2. Shall draw 12 watts during quiescent operation
    3. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall provide low power draw of less than 1 watt while in standby mode
      3. Shall return to full power status in less than one second upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -40 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    4. Shall be ENERGY STAR qualified
    5. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote control of volume and muting on 5-pole, 3.5 mm captive screw connector using optional Extron analog volume and mute controllers
    2. Shall support remote standby control on 5-pole, 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide an LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide a green LED for input signal presence indication
    4. Shall provide a red LED for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide one input on one 5-pole, 3.5 mm captive screw connector
    2. Shall provide one output on one 2-pole, 5 mm screw-lock captive screw connector
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide remote volume, mute, and standby control port on one 5-pole, 3.5 mm captive screw connector
    4. Shall provide a recessed, detented potentiometer for attenuation adjustment
    5. Shall provide a switch for selecting a high pass filter to roll off frequencies below 80 Hz
    6. Shall provide a green LED for input signal presence indication
    7. Shall provide a red LED for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, half rack width metal enclosure
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under BSMI, CCC, CE, c-UL, GS, KC Mark, PSE, S Mark, and UL
      2. Shall be UL listed for plenum airspaces and meet UL 2043 compliance for heat and smoke release, excluding the power supply when used with an optional Extron Flexible Conduit Adapter Kit
      3. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      4. Shall meet EMI/EMC compliances under CE, CISPR 22 Class B, C-tick, FCC Class B, ICES, and VCCI Class B
      5. Shall comply with appropriate requirements of ENERGY STAR, EU code of conduct, RoHS, and WEEE
    3. Shall provide three year parts and labor warranty
2. Approved device shall be the Extron XPA 2001-100V, part number 60-850-11; no alternates or equals.

XPA 2001-100V

Provide a compact, energy efficient audio amplifier that shall support one analog stereo input or two mono inputs, and one mono amplified output with 200 watts rms power output into a 100 volt line.
1. Compact mono amplifier with 100 watts rms power output into a 100 volt line and ENERGY STAR^® qualification
  1. Input Requirements
    1. Shall support one stereo or two mono, balanced or unbalanced signals on one 5-pole, 3.5 mm captive screw connector
    2. Shall actively sum incoming left and right channels for mono amplification
  2. Output Requirements
    1. Shall support one high impedance speaker level signal on one 2-pole, 5 mm screw-lock captive screw connector
    2. Shall provide a total of 200 watts rms output power into a 100 volt line measured at 1 kHz with less than 0.1% THD
    3. Shall provide a signal-to-noise ratio of 100 dB measured from 20 Hz to 20 kHz, unweighted
    4. Shall support a minimum load impedance of 50 ohms
    5. Shall provide a THD+N measurement of less than 0.1% measured at 1 kHz and 3 dB below clipping
    6. Shall provide damping factor of greater than 100 at 50 ohms
    7. Shall provide a switch-selectable high pass filter for frequencies below 80 Hz with a 12 dB per octave rolloff
  3. Amplifier Requirements
    1. Shall utilize an efficient Class D amplifier design
    2. Shall provide Class D Ripple Suppression technology
    3. Shall be convection cooled and operate without fans or vents
    4. Shall provide an automatic clip limiter to detect onset of clipping by comparing input and output waveforms and automatically reduce gain without audible artifacts to eliminate clipping distortion
    5. Shall provide multiple protection circuits that activate during output shorts, thermal overload, or DC faults
    6. Shall provide power factor correction technology to remove harmonic content on the AC power line
  4. Power Requirements
    1. Shall draw 45 watts during typical (1/8 power) operation
    2. Shall draw 12 watts during quiescent operation
    3. Shall provide a low power standby mode
      1. Shall enter standby mode after 25 minutes (+/- 5 minutes) of inactivity
      2. Shall provide low power draw of less than 1 watt while in standby mode
      3. Shall return to full power status in less than one second upon signal detection while in standby mode
      4. Shall feature an input signal detection threshold of -40 dBu, +/- 3 dB on a balanced input to deactivate standby mode
    4. Shall be ENERGY STAR qualified
    5. Shall provide internal universal power supply with IEC power socket and support for international 100-240 VAC, 50/60 Hz standards
  5. Control Requirements
    1. Shall support remote control of volume and muting on 5-pole, 3.5 mm captive screw connector using optional Extron analog volume and mute controllers
    2. Shall support remote standby control on 5-pole, 3.5 mm captive screw connector
  6. Front Panel Requirements
    1. Shall provide an LED for power indication that lights green when the unit is receiving power and active, and lights amber when the unit is in standby mode
    2. Shall provide an LED for indication of the enclosure temperature exceeding the optimal value
    3. Shall provide a green LED for input signal presence indication
    4. Shall provide a red LED for indication of clip warning and protection circuit activation
  7. Rear Panel Requirements
    1. Shall provide one input on one 5-pole, 3.5 mm captive screw connector
    2. Shall provide one output on one 2-pole, 5 mm screw-lock captive screw connector
      1. Shall support 22 AWG to 12 AWG speaker cables
    3. Shall provide remote volume, mute, and standby control port on one 5-pole, 3.5 mm captive screw connector
    4. Shall provide a recessed, detented potentiometer for attenuation adjustment
    5. Shall provide a switch for selecting a high pass filter to roll off frequencies below 80 Hz
    6. Shall provide a green LED for input signal presence indication
    7. Shall provide a red LED for indication of clip warning and protection circuit activation
  8. General Requirements
    1. Shall be enclosed in a rack-mountable 1U, half rack width metal enclosure
    2. Shall meet regulatory compliances
      1. Shall meet safety compliances under BSMI, CCC, CE, c-UL, GS, KC Mark, PSE, S Mark, and UL
      2. Shall be UL listed for plenum airspaces and meet UL 2043 compliance for heat and smoke release, excluding the power supply when used with an optional Extron Flexible Conduit Adapter Kit
      3. Shall meet UL 60065, IEC 60065, and BSEN 60065 for safety
      4. Shall meet EMI/EMC compliances under CE, CISPR 22 Class B, C-tick, FCC Class B, ICES, and VCCI Class B
      5. Shall comply with appropriate requirements of ENERGY STAR, EU code of conduct, RoHS, and WEEE
    3. Shall provide three year parts and labor warranty
2. Approved device shall be the Extron XPA 2001-100V, part number 60-850-11; no alternates or equals.

Add Item to Cart

Order Message Number

Part #

Note: Extron products using the Universal AC Outlet accept a number of different AC plug types. Before use, ensure that the device meets all regulatory requirements for your region and complies with all applicable local safety and electrical codes and standards.

Qty

Current Total:

View Cart

XPA 2001 -

Product Details

Annotation Graphics Processor

To view this page ensure that Adobe Flash Player version 11.0.0 or greater is installed and enabled.